13
THROTTLE ASSEMBLY3
1. Use 3mm hex socket tool to
remove the left handle from the
handlebar.
2. Use the 4mm hex socket tool to remove two screws on the left brake handle
and remove the left brake handle.
3. Find the throttle in toolbox and install it on the left handlebar, adjust it to the right
position and fasten it by 3mm hex socket tool.
4. Reinstall the removed left brake
handle and left grip by previous steps.
5. Remove the dustproof cover from the outlet of the main wire harness and insert
the throttle cable. (Please keep the dustproof cover for future use).
Multi Tool
3 & 4mm hex tool
To Next Page
