17
BATTERY REMOVAL / INSTALLATION7
1. With open battery cavity, check connectors.
Key is not needed to install battery.
2. Align bottom of battery into frame cavity
and push the top of the battery into the cavity
to connect.
3. Battery should be inside cavity, press closed
to hear a click. Key is not needed to install
battery but if in place remove. Enjoy the ride.
1. Turn Key Until you hear CLICK.
Move latch holder at top of the battery and
pull top of the battery away from the frame.
2. Lifting battery out turn the forks so the
frame area is clear of the battery.
3. Frame area is clear of battery.
Check connectors toward the bottom
of battery cavity.
Battery keys
To Next Page
