4
INSTRUCTIONS FOR USE
Charging the speaker
The device has built-in rechargeable battery. When the battery is drained, device would turn OFF
automatically. You would have to recharge the battery.
Plug the Micro USB end of the included USB cable into the charging port. Plug the other end into a USB
port on your computer or other devices made for USB charging. The Red LED Light illuminates indicating
that the device is being charged.
It takes 4 to 5 hours to fully charge the device. Once the device is fully charged, LED Light would turn
OFF.
Turning ON/OFF the Speaker –
Press and hold the Power ON/OFF button for 2-4 seconds to turn ON or OFF the speaker with indication
tone.
Connect using Bluetooth Technology manually
Turn On the speaker. You would hear a beep tone indicating that you are now in Bluetooth Pairing Mode
and Blue LED Light flashes rapidly.
Activate the Bluetooth function on your Bluetooth Device (Mobile Phone or Tablet). Please refer to
manufacturer’s instructions for instructions on enabling Bluetooth on your device.
Once you have activated Bluetooth on your device, select the device “Denali S1002” from the list of
available Bluetooth devices.
If required, enter the password ‘0000’ to confirm to finalize pairing. (Password is required only during
pairing devices for the first time)
Once paired successfully, the LED light flashes slowly.
Choose music from your Bluetooth® device and play music wireless through the speaker.
Please note pairing mode on the device will last for around 8 minutes. If no devices are paired within
around 8 minutes the device will power off automatically.
Once you have paired the Bluetooth speaker with a device, the speaker will remember this device and
will pair automatically when the device’s Bluetooth is activated and in range. You do not need to re-pair
any previously connected devices.
The Bluetooth speaker will attempt to automatically connect to the last device it was paired with when
switched on. If you want to pair it with a new device, please follow the steps outlined above.
Once the Bluetooth speaker is paired with your device the music will transmit through the Bluetooth
speaker. Please refer to your device’s user manual for further information.
Talking using the Bluetooth Speaker
Please ensure that you are paired with the Bluetooth Speaker to use the below functions.
Press the Phone button once to answer an incoming call.
Press and hold the Phone button for 3 seconds.
To Next Page
