Denali Audio S1002 - Wireless Music Playback; Aux-In Audio Playback

5
End Call
Incoming Call
After your phone conversation, short press the Phone button.
Increase Volume
During a call
Press and hold the Volume Increase button will increase the
volume.
Decrease Volume
During a call
Press and hold the Volume Decrease button will decrease the
volume.
Redial last number
Standby mode
and connected
to a device
Short press the Phone button twice.
Please Note
 Not all mobile phones support all the functions listed above. Please refer to your cell phone’s user’s
manual for further information.
 Certain functions and indication tones may vary depending on your mobile phone
Listening to Music Wirelessly
Please ensure that your device (iPhone, Tablet or Other Smart Phone) is paired with the
Bluetooth Speaker to stream music wirelessly. Once it is paired, play music from your device.
Function
Operation
Button
Increase Volume
Playing music
Press and hold the Volume Increase button will increase the
volume
Decrease Volume
Playing music
Press and hold the Volume Decrease button will decrease the
volume
Pause
Playing music
A short press on the Play / Pause button will pause the music
Play
Pausing
A short press on the Play / Pause button will resume the music
Next Track
While playing
music
Short press the Next Track or Volume Increase button will take
you to the next track
Previous Track
While playing
music
Short press the Previous Track or Volume Decrease button will
return you to the previous track
Note:
 The above functions only can be used in Bluetooth mode only. In Aux mode, you may need to control
through your source device.
 An indication tone will alert you when the volume is adjusted to the minimum or maximum level.
Play music using “Aux-In” Jack
1. Turn ON the device.
2. Insert the 3.5 mm Aux in cable (provided) to the Line-in jack of the speaker. And, the other end
of the cable connects to the audio device (such as computer / tablet etc.).
3. The Blue LED will light up without flashing.
4. Select your favourite song at the source device