CAIRplus Assembly
PR-2009-0096-GB • Subject to modifications • R8-10/2015 39
5.2.7 Roof installation of side-by-side unit with ECOROT
• Roof installation side-by-side units equipped with ECOROT
is identical to the installation of single units – refer to the
specification from page 33.
• Apply sealant evenly on the surface.
• Use the screws to attach the connecting panel to the end
wall (1).
• Finally produce a concave groove in the sealant.
Fig. 5-33: Roof installation of side-by-side unit with ECOROT
To Next Page
Loading...