Shipping and Storage CAIRplus
22 PR-2009-0096-GB • Subject to modifications • R8-10/2015
4.3 Storage
• Always place units on an even surface for storage or intermediate storage.
• Protect units from bumps and knocks which may damage the casing and protruding
components.
• If commissioning is not carried out within three months following the delivery, the belt
drive must be slackened.
• Rotate the motor axis and fan through at least 2 revolutions every 3 months.
4.3.1 Permitted storage conditions / permitted air condition for non-installed units
Air temperature -10 °C to +50 °C
Air humidity Store units in a dry, non-condensing atmosphere
Notice!
• Observe the permissible storage conditions when storing the unit. Remove the
original packaging only before installation.
• If the unit is stored for a period of time before installation or commissioning,
protect it from damage through elements, build-up of dust and dirt!
• Prior to commissioning, take appropriate measures to protect units without
packaging against build-up of dust and dirt. If packing takes place on site by
others, make sure that condensate cannot form below the packaging (consider
relevant clearance between the packaging and casing).
To Next Page
Loading...