Denkovi smartDEN IP-16R Series User Manual

smartDEN IP-16R-XX User Manual
13 Apr 2021
-21-
8.3. Network settings
Figure 8.5. Network settings
This menu lets you configure the network settings of smartDEN IP-16R-XX relay
module:
 Enable DHCP: This option allows DHCP to be enabled or disabled. If DHCP
is set to Enabled, the Network page must be saved and smartDEN IP-16R-XX
must be rebooted before obtaining an IP address;
 IP address: This is the IP address of the smartDEN IP-16R-XX. It needs to
be manually assigned only if DHCP is disabled. With DHCP enabled, this field
displays the currently assigned address;
 Gateway: This specifies the IP address of the gateway router. It is used for
accessing public time servers for automatic time synchronization;
 Subnet Mask: This is the subnet mask for the network on which the
smartDEN IP-16R-XX is installed;
 Primary DNS: Primary DNS (Domain Name Service) address;
 Secondary DNS: Secondary DNS address;
 Save button: Once you have changed the settings as required, click this
button.
You have to reboot the device for these settings to apply.

Denkovi smartDEN IP-16R Series Specifications

General

Brand	Denkovi
Model	smartDEN IP-16R Series
Category	Control Unit
Language	English