Denkovi smartDEN IP-16R Series User Manual

smartDEN IP-16R-XX User Manual
13 Apr 2021
-20-
8.2. General Settings
Figure 8.4. General settings
 Device Name: The name of the module (max 15 symbols). Every module can
have different name in your network so they can be distinguished;
 Save Outputs: When checked, each time the relays state is changed, it will
be saved in non-volatile memory (EEPROM), so after reboot/restart it will be
restored;
This option should be used with care in dynamic systems because of
restriction in maximum write cycles of the EEPROM (usually 100 000
write/erase cycles).
 Password: The password used for logging into the web admin and XML
operation (max. 10 chars);
When typed. the password in this screen is not hidden. Only in this case,
when the password is being changed, it is transmitted across the network
"in the open". Therefore, set passwords in a secure environment where
you can make sure that no one is "eavesdropping". Subsequent
transmissions of the password to "login" onto the device are encrypted and
"safe".
 Save button: Once you have changed the settings as required, click this
button.

Denkovi smartDEN IP-16R Series Specifications

General

Brand	Denkovi
Model	smartDEN IP-16R Series
Category	Control Unit
Language	English