smartDEN IP-16R-XX User Manual
13 Apr 2021
(ON) for the specified time by this parameter. During this time, the relay can
be set in low level (OFF) via week schedule, via some of the integration
protocols, web browser control, HTTP/XML/JSON:
o If the relay is set to high level (ON) via browser manually, via some of the
integration protocols or HTTP/XML/JSON it will be in high level (ON) for the
determined time by this parameter and then set back to low level;
o If the output is controlled by weekly schedule, then when the output
becomes in high level, it will be set to high level for time, specified by this
parameter and then will be set to low;
MQTT: Enable/disable MQTT notification on relay state change (for
smartDEN IP-16R-MQ only).
To Next Page
Loading...
Need help?
General