Denon AVC-A1H Quick Start Guide

10
EN
DE
FR
IT
ES
NL
SV
RU
PL
• Verify that you can see this screen on your TV.
Please select a language...
AV Receiver Setup Assistant
[1/7]
Français
Deutsch
Italiano
Español
English
If this screen is not displayed, please go back and retry the
steps again in the recommended sequence.
Follow the on-screen Setup
Assistant
The TV is now connected to the AVR.
The Setup Assistant will walk you through connecting and
confi guring your speakers and components to your Denon
AVR. Use the remote control and follow the instructions
on the TV screen to complete the AVR settings using the
Setup Assistant.
Verify the connection
Setup Assistant Complete!
Setup is now complete.
Your AVR is now properly configured to provide you
with the best possible sound and video experience.
Enjoy!
Done
• In case the unit was already setup back in time the Setup
Assistant won't start automatically and you only see the
Denon logo on screen. In such case you can access the Setup
Assistant by pressing SETUP on the remote control and
selecting Setup Assistant from the menu.
1. AVC-A1HE2_QSG_ENG_00A_221007.indd 101. AVC-A1HE2_QSG_ENG_00A_221007.indd 10 2022/10/24 9:06:422022/10/24 9:06:42

Denon AVC-A1H Specifications

General

Channels	15.4
Power Output	150W per channel (8 ohms, 20Hz-20kHz, 0.05% 2ch Drive)
HDMI Outputs	3
Audio Formats	Dolby Atmos, DTS:X, Auro-3D, IMAX Enhanced
Wireless Connectivity	Wi-Fi, Bluetooth
Type	AV Amplifier
IMAX Enhanced	Yes
8K/60Hz Pass-through	Yes
4K/120Hz Pass-through	Yes
HDR Support	HDR10, HDR10+, Dolby Vision, HLG
eARC	Yes
Phono Input	Yes
THD	0.05%
Frequency Response	10 Hz - 100 kHz
Input Sensitivity	200 mV
Signal-to-Noise Ratio	102 dB
Ethernet	Yes
USB Port	Yes
Multi-Room Audio	HEOS
Amplifier Type	Class AB