Denon AVC-A1H User Manual

3
Press the input source select button to select the input
source to be played.
The audio signal of the selected source is output to ZONE2 or
ZONE3.
0
To perform an operation with the main unit, press ZONE2
SOURCE or ZONE3 SOURCE. Each time you press ZONE2
SOURCE or ZONE3 SOURCE, the input source changes.
0
The following audio signals can be played in ZONE2 and ZONE3.
Input
Output
ZONE2 ZONE3
Digital Audio (HDMI)
S
z
1
Digital Audio (Coaxial/Optical)
S
z
2 S
z
2
Analog Audio
S S
USB
S S
HEOS Music
S S
z1
To play an HDMI signal other than PCM 2-channel in ZONE2, set “HDMI
Audio” to “PCM”. (v p. 258)
z2
Only a 2-channel PCM signal is supported.
Contents
Connections Playback Settings Tips Appendix
162
Front panel Display Rear panel Remote Index

Denon AVC-A1H Specifications

General

Channels	15.4
Power Output	150W per channel (8 ohms, 20Hz-20kHz, 0.05% 2ch Drive)
HDMI Outputs	3
Audio Formats	Dolby Atmos, DTS:X, Auro-3D, IMAX Enhanced
Wireless Connectivity	Wi-Fi, Bluetooth
Type	AV Amplifier
IMAX Enhanced	Yes
8K/60Hz Pass-through	Yes
4K/120Hz Pass-through	Yes
HDR Support	HDR10, HDR10+, Dolby Vision, HLG
eARC	Yes
Phono Input	Yes
THD	0.05%
Frequency Response	10 Hz - 100 kHz
Input Sensitivity	200 mV
Signal-to-Noise Ratio	102 dB
Ethernet	Yes
USB Port	Yes
Multi-Room Audio	HEOS
Amplifier Type	Class AB