Denon AVC-A1H User Manual

Adjusting the Volume in ZONE2/ZONE3
MUTE
:
VOLUME
df
ZONE2
ZONE3
o
Adjusting the volume
1
Press ZONE2 or ZONE3 to select the operating zone
with the remote control.
The button for the selected zone is lit.
2
Use VOLUME df to adjust the volume.
0
At time of purchase, “Volume Limit” is set to “70 (–10 dB)”.
(v p. 258)
0
Turn MASTER VOLUME after pressing ZONE2 SOURCE or ZONE3 SOURCE on
the main unit to adjust the volume.
o
Turning off the sound temporarily (Muting)
1
Press ZONE2 or ZONE3 to select the operating zone
with the remote control.
The button for the selected zone is lit.
2
Press MUTE :.
The sound is reduced to the level set at “Mute Level” in the menu.
(v p. 259)
0
To cancel mute, either adjust the sound volume or press
MUTE : again.
Contents Connections Playback Settings Tips Appendix
163
Front panel Display Rear panel Remote Index

Denon AVC-A1H Specifications

General

Channels	15.4
Power Output	150W per channel (8 ohms, 20Hz-20kHz, 0.05% 2ch Drive)
HDMI Outputs	3
Audio Formats	Dolby Atmos, DTS:X, Auro-3D, IMAX Enhanced
Wireless Connectivity	Wi-Fi, Bluetooth
Type	AV Amplifier
IMAX Enhanced	Yes
8K/60Hz Pass-through	Yes
4K/120Hz Pass-through	Yes
HDR Support	HDR10, HDR10+, Dolby Vision, HLG
eARC	Yes
Phono Input	Yes
THD	0.05%
Frequency Response	10 Hz - 100 kHz
Input Sensitivity	200 mV
Signal-to-Noise Ratio	102 dB
Ethernet	Yes
USB Port	Yes
Multi-Room Audio	HEOS
Amplifier Type	Class AB