13.1ch + ZONE3:
0
Setting to assign the power amplifiers in
this unit for ZONE3 to 2-channels
0
You can connect speakers for up to 13.1-
channels for MAIN ZONE.
11.1ch + ZONE2/3:
0
Setting to assign the power amplifiers
within this unit for ZONE2 and ZONE3
each to two different channel.
0
You can connect speakers for up to 11.1-
channels for MAIN ZONE.
13.1ch + ZONE2/3-MONO:
0
Setting to assign the power amplifiers in
this unit for ZONE2 and ZONE3 each to
a different channel.
0
You can connect speakers for up to 13.1-
channels for MAIN ZONE.
13.1ch (Bi-Amp):
0
Setting to assign the power amplifiers in
this unit for front speaker bi-amp
connection to 2-channels.
0
You can connect speakers for up to 13.1-
channels for MAIN ZONE.
11.1ch (Bi-Amp) +
ZONE2:
0
Setting to assign the power amplifiers
in this unit for front speaker bi-amp
connection to 2-channels.
0
Setting to assign the power amplifiers
in this unit for ZONE2 to 2-channels.
7.1ch Full Bi-Amp:
0
Setting to assign the power amplifiers
in this unit for front, center and
surround speakers to 10 channels.
0
You can connect speakers for up to
7.1 channels for MAIN ZONE.
13.1ch + Front B:
0
Setting to assign the power amplifiers
within this unit for connecting the
second set of front speakers.
0
You can switch between the desired
combination of front speakers A and
front speakers B.
Switch the front speaker using the “Front
Speaker” setting. (v p. 238)
Contents Connections Playback Settings Tips Appendix
214
Front panel Display Rear panel Remote Index
To Next Page
Loading...
Need help?
General
