Denon AVC-A1H User Manual

o
Bi-Amp
When “Assign Mode” is “13.1ch (Bi-Amp)” and “11.1ch (Bi-Amp) +
ZONE2”, the PRE OUT connector used for the bi-amp connection of
the front speakers is displayed. Depending on the settings of “Floor”
and “Height” - “Layout”, the connector is determined automatically.
HEIGHT 3:
The HEIGHT 3 speaker terminal is used
for the bi-amp connection of the front
speakers.
HEIGHT 2:
The HEIGHT 2 speaker terminal is used
for the bi-amp connection of the front
speakers.
FRONT WIDE:
The FRONT WIDE speaker terminal is
used for the bi-amp connection of the
front speakers.
SURROUND BACK:
The SURROUND BACK speaker
terminal is used for the bi-amp
connection of the front speakers.
o
Front B
When “Assign Mode” is “13.1ch + Front B”, the PRE OUT connector
used for the second front speakers is displayed. Depending on the
settings of “Floor” and “Height” - “Layout”, the connector is determined
automatically.
HEIGHT 3:
The HEIGHT 3 speaker terminal is used
for the second front speakers.
FRONT WIDE:
The FRONT WIDE speaker terminal is
used for the second front speakers.
SURROUND BACK:
The SURROUND BACK speaker
terminal is used for the second front
speakers.
Contents Connections Playback Settings Tips Appendix
223
Front panel Display Rear panel Remote Index

Denon AVC-A1H Specifications

General

Channels	15.4
Power Output	150W per channel (8 ohms, 20Hz-20kHz, 0.05% 2ch Drive)
HDMI Outputs	3
Audio Formats	Dolby Atmos, DTS:X, Auro-3D, IMAX Enhanced
Wireless Connectivity	Wi-Fi, Bluetooth
Type	AV Amplifier
IMAX Enhanced	Yes
8K/60Hz Pass-through	Yes
4K/120Hz Pass-through	Yes
HDR Support	HDR10, HDR10+, Dolby Vision, HLG
eARC	Yes
Phono Input	Yes
THD	0.05%
Frequency Response	10 Hz - 100 kHz
Input Sensitivity	200 mV
Signal-to-Noise Ratio	102 dB
Ethernet	Yes
USB Port	Yes
Multi-Room Audio	HEOS
Amplifier Type	Class AB