Distances
Set distance from listening position to speakers.
Measure beforehand the distance from the listening position to each
speaker.
o
Unit
Set the unit of distance.
Meters (Default)
Feet
o
Step
Set the minimum variable width of the distance.
0.1 m / 0.01 m (Default: 0.1 m)
1 ft / 0.1 ft
o
Set the distance
0.00 m – 18.00 m / 0.0 ft – 59.1 ft
0
The speakers that can be selected differ depending on the “Amp Assign” and
“Speaker Configuration” settings. (“Amp Assign” (v p. 213), “Speaker
Configuration” (v p. 225))
0
Default settings:
Front L / Front R / Front Height L / Front Height R / Center / Front Wide L /
Front Wide R / Front Dolby L / Front Dolby R / Subwoofer 1 / Subwoofer 2 /
Subwoofer 3 / Subwoofer 4: 3.60 m (11.8 ft)
Speakers other than the above: 3.00 m (9.8 ft)
0
Set the difference in the distance between the speakers to less than 6.00 m
(19.7 ft).
Contents Connections Playback Settings Tips Appendix
234
Front panel Display Rear panel Remote Index
To Next Page
Loading...
