Need help?Do you have a question about the Denon AVC-X4800H and is the answer not in the manual?
General| Receiver type | Surround |
|---|---|
| RMS rated power | 200 W |
| Pre-out channels | 11.4 |
| Speaker selector | A / B |
| Pre-out connectivity | Yes |
| Audio output channels | 9.4 channels |
| Power output per channel (1KHz@6 Ohm) | 165 W |
| Power output per channel (20-20KHz@8 Ohm) | 125 W |
| HDMI in | 7 |
| USB ports quantity | 1 |
| Digital audio coaxial in | 2 |
| Display | - |
| HDCP version | 2.3 |
| Apple docking | No |
| Product color | Silver |
| Audio decoders | DTS Virtual:X, DTS-HD Master Audio, DTS:X, Dolby Atmos, Dolby Surround, Dolby TrueHD |
| Number of products included | 1 pc(s) |
| Number of HDMI outputs | 3 |
| Audio formats supported | AAC, ALAC, FLAC, MP3, WAV, WMA |
| Supported radio bands | Not supported |
| Power consumption (standby) | 0.1 W |
| Power consumption (typical) | 710 W |
| Package weight | 16000 g |
Weight and Dimensions| Depth | 389 mm |
|---|---|
| Width | 434 mm |
| Height | 236 mm |
| Weight | 13400 g |
Describes the unit's audio capabilities like 9-channel amplifier, Dolby Atmos, and DTS:X.
Highlights 8K support, HDCP 2.3 compatibility, and eARC function.
Identifies and describes controls and indicators on the front panel.
Diagram labeling all connectors and terminals on the rear panel.
Lists HDMI, PRE OUT, Video, and Component video connectors.
Details remote control jacks, trigger outputs, signal ground, and speaker terminals.
Explains the proper placement of speakers for optimal surround sound.
Guides connecting speakers to the unit's terminals, including multi-channel support.
Configures speaker systems (5.1, 7.1, 9.1, 11.1) and Amp Assign settings.
Guide on connecting a TV based on HDMI and ARC/eARC compatibility.
General instructions for connecting playback devices via HDMI, component, or composite video.
Steps to enable and configure HDMI Control for device interoperability.
How to register and recall favorite settings using QUICK SELECT buttons.
Protects settings from inadvertent changes by locking front panel buttons.
Disables or enables the remote control sensor function.
Configures input connector assignments, source renaming, and input modes.
Sets speaker sizes, presence, and layout for optimal surround sound.
Configures wired/wireless LAN connections, Wi-Fi, and security settings.
Management of HEOS accounts for music services.
Resets settings to factory defaults or restores firmware.
General checks for problems: connections, operation, and other devices.
Troubleshooting steps for power not turning on or automatically turning off.
Troubleshooting steps when there is no sound from speakers or subwoofers.
Troubleshooting no video display on TV due to connections, settings, or HDCP issues.
Troubleshooting wireless LAN connection problems.
Indicates settable audio output channels and surround parameters for various sound modes.
Comprehensive table mapping input signals to corresponding selectable sound modes.
Details audio section power amplifier specifications and output connectors.
To Next Page
