Denon AVC-X4800H - Page 225

o
Set the distance
0.00 m – 18.00 m / 0.0 ft – 59.1 ft
0
The speakers that can be selected differ depending on the “Amp Assign” and
“Speaker Configuration” settings. (“Amp Assign” (v p. 205), “Speaker
Configuration” (v p. 216))
0
Default settings:
Front L / Front R / Front Height L / Front Height R / Center / Front Dolby L /
Front Dolby R / Subwoofer 1 / Subwoofer 2 / Subwoofer 3 /
Subwoofer 4: 3.60 m (11.8 ft)
Speakers other than the above: 3.00 m (9.8 ft)
0
Set the difference in the distance between the speakers to less than 6.00 m
(19.7 ft).
o
Dolby Speaker Setup
Set the distance between the Dolby Atmos Enabled speaker and the
ceiling.
0.90 m - 3.30 m / 3.0 ft - 10.8 ft
(Default : 1.80 m / 5.9 ft)
0
This can be set when “Front Dolby”, “Surround Dolby” or “Back Dolby” is set to
“Large” or “Small” in “Speaker Configuration”.
o
Set Defaults
The “Distances” settings are returned to the default settings.
Contents
Connections Playback Settings Tips Appendix
225
Front panel Display Rear panel Remote Index