Do you have a question about the Denon AVR-1600 and is the answer not in the manual?
Type | AV receiver |
---|---|
HDMI Outputs | 1 |
4K Ultra HD Pass-through | Yes |
Bluetooth | Yes |
Input Sensitivity/Impedance | 200 mV / 47 kOhms |
Tuner Frequency Range | FM: 87.5 - 108 MHz, AM: 522 - 1611 kHz |
Total Harmonic Distortion | 0.08% |
Signal-to-Noise Ratio | 98dB |
Dimensions (W x H x D) | 434 x 151 x 319mm |
Frequency Response | 10Hz-100kHz |
Details the 60W power output for each channel and its discrete configuration for stable sound reproduction.
Explains the AVR-1600's Dolby Digital decoder recreating realistic 3D soundscapes for video programs.
Provides an external terminal for 6-channel sources like DTS and DVD-Audio, supporting multi-channel formats.
Lists various digital and analog audio input types available on the AVR-1600.
Details the available analog pre-outputs and rec-outputs for audio connections.
Specifies the composite video input and output connections for AV systems.
A function allowing independent selection of video sources from audio sources.
Describes pre-out terminals for connecting external power amplifiers to upgrade the system.
Automatically remembers the last used surround mode for each program source.
Notes the use of binding posts for Front L/R and Center speaker connections.
Allows adjustment of delay times and other parameters for personalized home theater setup.
Describes the tuning system used for radio reception.
Allows random preset memory tuning for 40 AM/FM stations.
Feature for automatically storing preset radio stations.
Allows adjustment of treble and bass frequencies for sound customization.
Provides two switched AC outlets for powering peripheral devices.
Feature for adjusting audio levels across all channels simultaneously.
Details the rated output power for front, center, and surround channels.
Lists input sensitivity, impedance, and output levels for the preamplifier section.
Provides tuning frequency ranges and usable sensitivity for FM and AM bands.
Includes power supply, consumption, dimensions, and weight of the unit.