Denon AVR-1602

AV SURROUND RECEIVER
AVR- 1602/682
OPERATING INSTRUCTIONS
MODE D'EMPLOI
D£NON ...... _ _ _ mt_
_© D.._, _ /o,o 000-_q
© ©_O O O O @iO © © ©
©
I_ I
_EN_
mm_k
FOR ENGL(SH READERS PAGE 2 PAGE 47, 92, 93
• We greatly appreciate your purchase of this unit.
• To be sure you take maximum advantage of all the
features this unit has to offer, read these instructions
carefully and use the set properly. Be sure to keep this
manual for future reference should any questions or
problems arise.
POUR LES LECTEURS FRANCAJS PAGE 2, 48 PAGE 93
• Nous vous remercions pour I'achat de cet appareil.
• Pour _tre stir de profiter au maximum de toutes les
caracteristiques qu'offre cet appareil, lire avec soin ces
instructions et bien utiliser I'appareil. Toujours
conserver ce mode d'emploi pour s'y referer
ulterieurement en cas de question ou de probleme.
"SERIAL NO.
PLEASE RECORD UNIT SERIAL NUMBER ATTACHED TO
THE REAR OF THE CABINET FOR FUTURE REFERENCE"
"NO. DE SERIE
PRIERE DE NOTER LE NUMERO DE SERIE DE L'APPAREIL
INSCRIT A L'ARRIERE DU COFFRET DE FA_ON A POUVOIR
LE CONSULTER EN CAS DE PROBLEME."

Denon AVR-1602 Specifications

General

Channels	5.1
Amplifier Type	Discrete
Total Harmonic Distortion	0.08 %
Frequency Response	10 Hz - 100 kHz
Input Sensitivity	200 mV
Input Impedance	47 kOhms
Signal-To-Noise Ratio	98 dB
Built-in Decoders	Dolby Digital, DTS
DSP Modes	5
Tuner Bands	AM/FM
Preset Channel Quantity	40
Remote Control	Yes
Width	434 mm
Output Impedance / Channel	8 ohms
Audio D/A Converter	24-bit/96kHz
Tuning Range	FM: 87.5 - 108 MHz
Input Connectors	1 x Optical, 1 x Coaxial
Output Connectors	1 x Subwoofer
Video Inputs/Outputs	Composite, S-Video
Power Output	75W per channel (8 ohms, 20Hz - 20kHz, 0.08% THD)

Summary

Safety Precautions

Electrical Safety Warnings

Covers electrical shock risks, proper plug use, and warnings.

General Usage and Handling Precautions

Advises on avoiding heat, moisture, foreign objects, and proper cord handling.

Detailed Safety Instructions

Installation, Ventilation, and Heat Safety

Details safe placement regarding water, ventilation, and heat sources.

Power, Grounding, and Servicing Safety

Covers power source connection, grounding, cord protection, cleaning, and qualified servicing.

Introduction to the AV Receiver

Initial Setup and Precautions Before Use

Guides on moving the unit, checking connections, and storing the manual.

Installation Cautions

Preventing Noise and Ensuring Ventilation

Advises on placement to avoid interference and ensure proper heat dissipation.

Handling Cautions

Input Switching, Muting, and Standby Power

Explains precautions for input changes, muting circuits, and standby power state.

Component Identification

Front Panel Layout and Controls

Identifies and describes the function of each button and indicator on the front panel.

Initial Setup Procedure

Step-by-Step Guide to System Setup

Outlines the three essential steps for setting up the AV receiver before initial use.

Speaker System Layout

Basic Speaker Placement Guidelines

Provides a visual guide for arranging surround sound speakers for optimal playback.

Connecting Audio Components

Connecting Sources like Tape Decks and CD Players

Details how to connect analog and digital audio sources to the receiver.

Connecting Video Equipment

Connecting Tuners, DVD Players, and Video Decks

Guides on connecting video sources like tuners, DVD players, and VCRs using coaxial and pin plug cords.

Speaker System Setup

Connecting Speaker Wires and Banana Plugs

Guides on correctly connecting speaker cords and using banana plugs, ensuring polarity.

Understanding Speaker Impedance Requirements

System Configuration Settings

Initializing System Setup

Guides on setting the slide switch and using system setup buttons to begin configuration.

Speaker Configuration Setup

Setting Front, Center, and Surround Speaker Types

Guides on selecting speaker types (Large/Small) for front, center, and surround channels.

Speaker and Subwoofer Configuration

Speaker Size Parameters and Subwoofer Mode Settings

Explains speaker size selection logic and setting the subwoofer mode (Normal/+MAIN).

Speaker Distance and Delay Time Setup

Measuring and Setting Speaker Distances

Details how to measure and input distances from listening position to speakers.

Basic Unit Operation

Powering On and Speaker Selection

Guides on turning the unit on and selecting front speakers (A or B).

Selecting Input Sources and Playback Modes

Choosing Program Sources (CD, CDRTAPE)

Understanding Input Mode Selection Functions

Describes various input modes for digital and analog signal detection and playback.

Surround Sound Setup and Adjustment

Test Tone Speaker Level Calibration

Details using test tones to calibrate speaker output levels for surround modes.

Adjusting Individual Speaker Channel Levels

Dolby Surround Pro Logic II Mode

Selecting and Configuring Pro Logic II Modes

Explains how to select the source, Pro Logic II mode, and optimum modes for playback.

Setting Surround Parameters for Pro Logic II

Dolby Digital and DTS Surround Modes

Selecting Digital Input and Surround Modes

Explains selecting input sources, surround modes, and playing sources with Dolby Digital/DTS marks.

Configuring Cinema EQ and Dynamic Compression

Microprocessor Initialization Procedure

Resetting the Unit to Factory Defaults

Provides instructions for resetting the microprocessor and restoring default settings.

Troubleshooting Common Issues

Diagnosing and Resolving Unit Problems

Provides a table of common symptoms, causes, and solutions for troubleshooting the unit.