Denon AVR-1602

1
2
4
Select the function to which the component you want to play
is connected
EX:
I_'IBIVBp
DVDNDP
(Main u/it) (Remote control unt)
Select the Dolby Surround Pro Logic [! mode.
Select the DOLBY PRO
LOGIC ]I mode using the
SELECT buttons.
The surround mode
switches when the
SURROUND MODE button
is pressed Select the
DOLBY PRO LOGIC I1
mode
SELECT
(Main unit}
• The Dolby Pro Logic indicator lights
Display
L.-=U L..i:::= "_" ::" L._ .L .L
[" L.. .L .L L., L.-=%=i.,.'
SURROUND
MODE
(Remote corltro{ unit)
Light
I_PRO LOGIC
Play a program source with the I"lrlr_m] mark.
• For operating instructions, refer to the manuals of the
respective components.
Select the surround parameter mode
SURROUND Display
"_" _ [HODE. C:[i'-.iE:HF:i]
(Mail unit} (Remote control unt)
"_ TO perform this operation from the remote control unit,
check that the mode selector switch is set to "AUDIO"
Select the optimum mode for the source.
(Main u/it) (Remote control unit}
i cuE3"[
• ] o o o o o o o o
• =
Do
J
o o o
2 4,6 2,5,7
s
1--
2--
4,5,6,7-- 4_ _ _i_
DENON
Set the surround parameters according to the mode
8UI_qOI,_ID
{Main ur/Jt) (Remote control unit}
• The mode switches as shown below each time the button
is pressed.
_-MODE PRO LOGIC
CINEMA EQ
DEFAULT
_=-MODE CINEMA _MODE MUSIC
CINEMA EQ PANORAMA
DEFAULT DIMENSION
CENTER WIDTH
DEFAULT
3O