To Next PageTo Next PageWhat to do if no video is output with HDMI connection on Denon AVR-2312?
If there's no video output via HDMI on your Denon Receiver, first, check the HDMI cable connections. Second, ensure the input source matches the connected HDMI port. Finally, verify that your TV is compatible with HDCP (copyright protection). Incompatibility can prevent correct video output.
Why Denon AVR-2312 power does not turn on?
General| Impedance | 8 Ω |
|---|---|
| Speaker selector | A+B |
| Input sensitivity | 200 mV |
| Pre-out connectivity | Yes |
| Audio output channels | 7.1 channels |
| Audio A/D Converter (ADC) | 24-bit/96kHz |
| Signal-to-Noise Ratio (SNR) | 100 dB |
| Total Harmonic Distortion (THD) | 0.08 % |
| Power output per channel (1KHz@8 Ohm) | 135 W |
| Power output per channel (20-20KHz@8 Ohm) | 105 W |
| HDMI in | 7 |
| Composite video in | 4 |
| Ethernet LAN (RJ-45) ports | 1 |
| Multichannel audio input type | RCA |
| Component video (YPbPr/YCbCr) in | 2 |
| Headphone connectivity | 6.3 mm |
| Connectivity technology | Wired |
| Speakers connectivity type | Binding post |
| Audio formats supported | AAC, FLAC, MP3, WAV, WMA |
| Image formats supported | JPG |
| Wi-Fi | No |
| AM band range | 522 - 1611 kHz |
| FM band range | 87.5 - 108 MHz |
| Supported radio bands | AM, FM |
| Preset stations quantity | 56 |
| Internet radio services supported | Last.fm, Napster |
| Supported video modes | 1080i, 1080p, 480i, 480p, 576i, 576p, 720p |
| Display | VFD |
| HDMI version | 1.4a |
| Product color | Black |
| Audio decoders | Dolby Pro Logic IIz, Dolby TrueHD, DTS-HD Master Audio |
| Volume control | Rotary |
| Apple docking compatibility | iPad, iPhone, iPod |
| Number of products included | 1 pc(s) |
| AC input voltage | 230 V |
| AC input frequency | 50 Hz |
| Power consumption (standby) | 0.1 W |
| Power consumption (typical) | 600 W |
Weight and Dimensions| Depth | 382 mm |
|---|---|
| Width | 434 mm |
| Height | 167 mm |
| Weight | 11000 g |
