Denon AVR-2312CI

64
Connect
FLFL’ FR FR’
C
SW
SL
SR
Multi channel playback
(Surround mode)
2-channel playback
(Direct/Stereo mode)
Switching
5.1-channel + 2-channel connection
You can connect the other front speakers for 2-channel playback using
the DIRECT mode or STEREO mode.
The speakers used exclusively for 5.1-channel playback and the
speakers used exclusively for 2-channel playback are automatically
switched for playback in accordance with the surround mode.
To set the speakers for automatic switching during playback, select
“Amp Assign” and set to “2CH” using steps 3 and 4 of “Set up “Amp
Assign”” (vpage65).
NOTE
•For speaker cable connections, see C page 6 “Connecting the
speakers”.
•For speaker impedance , see page59.
Basic version
Advanced version
Information
Advanced version