Denon AVR 4308CI - AV Network Receiver - Page 16

- 16 -
Z2 COMMAND : "*" parameter uses two ASCII characters. (see page4 J) section)
COMMAND PARAMETER
function example
Z2PS BAS UP
ZONE2 BASS UP/DOWN , direct change to **dB
Z2PSBAS UP<CR>
BAS DOWN
**:00 to 99 by ASCII , 00=0dB
Z2PSBAS DOWN<CR>
BAS **
---AVR-4308 can be operated from -10 to +10(40 to 60)
Z2PSBAS 00<CR>
BAS ?
Return Z2PSBAS Status
Z2PSBAS ?<CR>
TRE UP
ZONE2 TREBLE UP/DOWN , direct change to **dB
Z2PSTRE UP<CR>
TRE DOWN
**:00 to 99 by ASCII , 00=0dB
Z2PSTRE DOWN<CR>
TRE **
---AVR-4308 can be operated from -10 to +10(40 to 60)
Z2PSTRE 00<CR>
TRE ?
Return Z2PSTRE Status
Z2PSTRE ?<CR>