Why is the sound broken during playback on my Denon AVR-4308CI?
When playing broadcast data with a high bit rate, the sound may be broken, depending on the communications conditions. This is not a malfunction.
Why is there no sound from the subwoofer on my Denon Stereo Receiver?
If your subwoofer isn't producing sound, check these items: * Make sure the subwoofer is powered on. * In the "Speaker configuration" settings, ensure that "Subwoofer" is set to "Yes". * Verify that the subwoofer is properly connected. * Adjust the subwoofer's volume to an appropriate level.
Why can't I play Internet radio on my Denon AVR-4308CI?
Several factors can prevent Internet radio playback: * The Ethernet cable may not be properly connected, or the network may be disconnected. Check the connection status. * The program may be broadcast in a non-compatible format. Only Internet radio programs in MP3 and WMA formats can be played. * The computer's or router's firewall may be activated. Check the firewall settings. * The radio station may not be currently broadcasting. Choose a station that is currently broadcasting. * The IP address may be incorrect. Verify the receiver's IP address.
Why are HDMI audio signals not outputting from the speakers on my Denon Stereo Receiver?
If HDMI audio signals aren't being output, check if the “Manual Setup” – “HDMI Setup” – “Audio” setting is set to “TV”. If so, change it to “Amp”.
Why is no sound coming from the center speaker on my Denon AVR-4308CI?
If you are playing a monaural source (like TV or AM radio) in STANDARD (Dolby/ DTS Surround) mode, no sound may be output from the center speaker. Try setting the mode to something other than “STANDARD” (Dolby/ DTS Surround).
Why can't I connect to preset or favorite radio stations on my Denon AVR-4308CI?
It may be because the radio station is not currently broadcasting or is no longer in service. Wait a while before trying again. It is not possible to connect to radio stations that are no longer in service.
Why doesn't the “DOLBY DIGITAL” indicator appear on the display of my Denon AVR-4308CI Stereo Receiver?
The DVD player’s digital audio output setting may not be proper. Check the DVD player’s audio output setting.
Why are no test tones produced when I press the TEST TONE button on my Denon AVR-4308CI Stereo Receiver remote?
The surround mode may not be set to “STANDARD” (Dolby/DTS Surround). Set it to the “STANDARD” (Dolby/ DTS Surround) mode.
How do I troubleshoot no picture on my Denon AVR-4308CI?
If you're not getting a picture on your Denon Stereo Receiver, consider the following: * Check the connections between the receiver and the monitor to ensure they are secure. * Verify that the monitor's input setting is correct. * If PURE DIRECT mode is enabled, cancel it. * If the player is connected using component input connectors and the monitor is connected using video or S-Video output connectors, set the player to interlace (480i/576i) signals, as high-definition and progressive video signals are not down-converted.
What to do if Denon AVR-4308CI doesn't respond to the remote control?
If your Denon Stereo Receiver isn't responding to the remote, try these steps: * Replace the batteries with new ones. * Make sure you are within the remote's operational range and there are no obstructions between the remote and the receiver. * Check that the batteries are inserted correctly, matching the polarity marks. * Ensure the receiver's remote control sensor isn't exposed to strong light, such as direct sunlight or certain types of fluorescent lights. * Verify that the remote ID of the main unit and remote control unit match.
General| Type | AV Receiver |
|---|---|
| Channels | 7.1 |
| Total Harmonic Distortion (THD) | 0.05% |
| Frequency Response | 10 Hz - 100 kHz (+1, -3 dB) |
| Input Sensitivity | 200 mV |
| HDMI Inputs | 4 |
| HDMI Outputs | 2 |
| Component Video Inputs | 3 |
| Component Video Outputs | 1 |
| Phono Input | Yes |
| Ethernet | Yes |
| Wi-Fi | No |
| HD Radio | Yes |
| USB Port | Yes |
| Bluetooth | No |
| Audyssey Room Correction | Audyssey MultEQ XT |
| Digital Audio Inputs | 4 optical, 2 coaxial |
| Digital Audio Outputs | 1 coaxial |
| Video Upconversion | Yes (up to 1080p) |
| Video Scaling | Yes (to 1080p) |
| Supported Audio Formats | Dolby TrueHD, DTS-HD Master Audio, Dolby Digital Plus |
| Network Features | Internet Radio, Streaming Audio |
| Dimensions (W x H x D) | 434 x 171 x 429 mm |
| Power Output | 140 watts per channel (8 ohms, 20 Hz - 20 kHz, 0.05% THD, 2 channels driven) |
| Weight | 40.8 lbs (18.5 kg) |
Explains GUI navigation and displays with examples for efficient user interaction.
Visual guide to the GUI menu structure for efficient navigation and understanding.
Covers electrical warnings, opening the unit, and comprehensive safety instructions for product operation.
Details FCC rules and compliance requirements for US customers.
Details Industry Canada regulations and compliance for Canadian customers.
Lists all items included in the product package for user verification.
Guidelines for safe operation, condensation prevention, placement, and remote control basics.
Identifies and explains the buttons, knobs, and indicators on the front panel.
Identifies all input and output connectors on the rear panel for connectivity.
Detailed guides for using both the main (RC-1068) and sub (RC-1070) remote controls.
Explains the types of cables used for various audio/video connections.
Illustrates speaker placement and typical configurations for 7.1 channel systems.
Step-by-step guide for connecting speaker cables and understanding the protection circuit.
Details HDMI version, Deep Color, HDCP compatibility, and connection notes.
Instructions for connecting monitors, DVD players, and other playback devices.
Instructions for connecting these specific source devices.
Instructions for connecting TV/cable tuners and satellite receivers.
How to connect digital video recorders and video cassette recorders for recording.
Connecting tape decks, MD recorders, and devices with DENON LINK connectors.
Instructions for connecting video cameras, game consoles, and external power amplifiers.
Details on connecting USB memory devices and XM Radio components.
Setup for AM/FM antennas and HD Radio antennas.
Details broadband internet, modem, router, computer, and network settings.
Connecting amplifiers for multi-zone audio and external control interfaces.
Instructions for safely connecting the power cord and finishing setup.
Explains GUI navigation, examples, and the auto setup process.
Comprehensive map of all available GUI menu options and their pages.
Steps to prepare for auto setup, including microphone connection and identifying the listening position.
Details steps for speaker setup, measurement, calculation, and storing results.
Lists errors, options for EQ/mic, and parameter checks.
Manual configuration for speaker sizes, subwoofer usage, and low-frequency signal reproduction.
Manual adjustment of speaker levels, surround speaker selection, and crossover settings.
Adjusting i/p Scaler, Resolution, Aspect Ratio, Color Space, RGB Range, Auto Lip Sync, Audio, and Monitor Out.
Configuring audio settings for external inputs, stereo, downmix, and auto surround modes.
Adjusting speaker EQ, configuring network, and setting power saving/PC language.
Step-by-step instructions for setting up a wireless LAN connection.
Configuring zone audio playback and displaying network status.
Configuring amp assignments, volume limits, managing sources, and GUI customization.
Configuring various advanced options like triggers, remote ID, and security.
Procedures for updating software, language, and configuring input sources.
Settings for various input sources and playback modes.
Explains standard playback and different surround modes for 2-channel audio.
Details advanced surround modes and direct playback options.
Configuring various audio parameters for optimal sound.
Adjusting video settings and viewing system status.
Details on signal status, auto surround, quick select, and radio presets.
Procedures for powering the unit and starting playback, including volume control.
Guide to finding and saving radio stations.
Instructions for tuning and operating XM radio.
Tuning HD radio, searching categories, and checking XM signal strength.
Details on HD Radio signal information and choosing audio programs.
Playing music, photos, and videos from an iPod device.
Using USB devices, connecting to internet radio and music servers.
Accessing computer/USB content and managing internet radio presets.
Procedures for tuning, presetting, and recalling internet radio stations.
Details on USB file formats, album art, and playing files from a computer.
Instructions for controlling the unit using a web browser.
Guide for SACD playback and recording to external devices.
Adjusting speaker levels, fader, and storing favorite settings.
Details on memory functions and resetting the unit to defaults.
How to control DENON devices and program the remote for other brands.
Explains button operations for DVD players, VCRs, and iPods.
Explains button operations for TV, satellite receivers, and tuner/network devices.
Procedures for setting unique IDs and teaching the remote IR signals.
Registering operations, copying buttons, and setting backlight duration.
Procedures to reset remote functions and adjust display brightness.
Lists functions controllable by the sub remote and how buttons control zones/sources.
Procedures for selecting and locking zones for the sub remote.
Configuring remote IDs and resetting multi-zone configurations.
Explains Amp Assign and provides diagrams for multi-zone setups 1, 2, and 3.
Provides diagrams and explanations for multi-zone setups 4 and 5.
Provides diagrams and explanations for multi-zone setup 6.
Details amplifier preparation for ZONE2, ZONE3, and ZONE4 outputs.
Managing power, sources, and volume for individual zones.
Guidelines for positioning surround speakers and example layouts.
Details on Dolby Pro Logic, Digital Plus, and TrueHD formats.
Explains DTS Digital Surround, DTS-HD High Resolution, and Master Audio.
Details on DTS-ES Discrete/Matrix and DTS NEO:6.
Explains various advanced audio features and technologies.
Explains HDMI, Deep Color, xvYCC, and Lip Sync features.
Overview of surround modes and their adjustable parameters.
Table showing parameter adjustability across different surround modes.
Table showing which input signals work with each surround mode.
Continues the table detailing parameter adjustability across surround modes.
Details on media player, internet radio server, and digital rights management.
Explains Wi-Fi, IEEE 802.11b/g, modes, SSID, and WEP.
Explains Wi-Fi security protocols for wireless networks.
Table showing video signal input vs. output compatibility with monitors.
Table showing video signal input vs. output compatibility for ZONE2.
Table showing speaker terminal assignments based on Amp Assign settings.
Table explaining zone power status and speaker output.
Covers power, sound, display, and indicator issues.
Addresses problems with remote control operation.
Solutions for sound issues from specific speakers or formats.
Solutions for display and picture issues.
Troubleshooting connectivity and playback problems for these sources.
Resolving issues with wireless connectivity and XM radio.
Detailed technical specifications for the audio components.
Technical details for video, tuner, radio, and network interfaces.
Details on the dimensions and weight of remote controls.
Explains WPA, WPA2, and AES encryption methods.
Details on XM antenna status and signal issues.
Network standards, power supply, dimensions, and weight.
Detailed technical specs for video inputs, tuners, and HD radio.
Lists preset codes for Denon devices and various cable providers.
Lists preset codes for satellite receivers and the start of TV brands.
Continues the list of television preset codes.
Continues the list of television preset codes.
Continues the list of television preset codes.
Continues the list of television preset codes.
Continues the list of television preset codes.
Continues the list of television preset codes.
Continues the list of television preset codes.
Continues the list of television preset codes.
Continues the list of television preset codes.
Continues the list of television preset codes.
Continues the list of television preset codes.
Continues the list of television preset codes.
Continues the list of television preset codes.
Continues the list of television preset codes.
Lists preset codes for specific Denon DVD player models.
To Next Page
