Denon AVR 4308CI - AV Network Receiver - Page 18

- 18 -
Z3 COMMAND : "*" parameter uses two ASCII characters. (see page4 J) section)
COMMAND PARAMETER
function example
Z3PS BAS UP
ZONE3 BASS UP/DOWN , direct change to **dB
Z3PSBAS UP<CR>
BAS DOWN
**:00 to 99 by ASCII , 00=0dB
Z3PSBAS DOWN<CR>
BAS **
---AVR-4308 can be operated from -10 to +10(40 to 60)
Z3PSBAS 00<CR>
BAS ?
Return Z3PSBAS Status
Z3PSBAS ?<CR>
TRE UP
ZONE3 TREBLE UP/DOWN , direct change to **dB
Z3PSTRE UP<CR>
TRE DOWN
**:00 to 99 by ASCII , 00=0dB
Z3PSTRE DOWN<CR>
TRE **
---AVR-4308 can be operated from -10 to +10(40 to 60)
Z3PSTRE 00<CR>
TRE ?
Return Z3PSTRE Status
Z3PSTRE ?<CR>