Denon AVR-550SD - Optimizing Source Playback Modes; Selecting Optimum Playback Mode; Adjusting Various Surround Parameters; Selecting Surround Parameters

25
ENGLISH
5
Select the optimum mode for the source.
(Remote control unit)
6
Select the various parameters. (See “Surround
parameters q” for a description of the various
parameters.)
(Remote control unit)
MODE musicMODE cinema MODE game
7
Set the various surround parameters.
(Remote control unit)
8
Press the SURROUND PARAMETER button to
finish surround parameter mode.
(Remote control unit)
1
2
5, 7
2
1
6
4, 8
6
5, 7
DTS NEO:6 mode
1
Select the function to which the component
you want to play is connected.
Example: DVD
FUNCTION / SELECT
(Main unit) (Remote control unit)
2
Select the DTS NEO:6 mode.
DOLBY/DTS
SURROUND
(Main unit) (Remote control unit)
3
Play a program source.
• The mode switches as shown below each
time the button is pressed.
DOLBY
SURROUND
DTS
SURROUND
The DTS NEO:6 Cinema or
Music mode can be chosen
directly by pressing the
CINEMA or MUSIC button
on the remote control unit
during playback in the DTS
NEO:6 mode.
4
Select the surround parameter mode.
(Remote control unit)
To perform this operation from the remote
control unit, check that the mode selector
switch is set to “AUDIO”.
5
Select the optimum mode for the source.
(Remote control unit)
6
Select the various parameters.
(Remote control unit)
MODE musicMODE cinema
Display
M O DE ci nem a