Denon AVR-S570BT User Manual

o
Contents
Tips
I want the volume not to become too loud by mistake 107
I want to keep the volume at the same level when I turn the power
on 107
I want to have the subwoofer always output audio 107
I want to set the optimized listening environment after changing the
configuration/position of the speakers or changing a speaker to a
new one 107
I want to combine a desired video with the current music 107
Troubleshooting
Power does not turn on / Power is turned off 109
Operations cannot be performed through the remote control unit 110
Display on this unit shows nothing 110
No sound comes out 111
Desired sound does not come out 112
Sound is interrupted or noise occurs 114
No video is shown on the TV 115
The menu screen is not displayed on the TV 117
The color of the menu screen and operations content displayed on
the television is different from normal 117
USB memory devices cannot be played back 118
File names on the USB memory device are not displayed properly 119
Bluetooth cannot be played back 119
The HDMI control function does not work 120
Contents Connections Playback Settings Tips Appendix
106
Front panel Display Rear panel Remote Index

Denon AVR-S570BT Specifications

General

Channels	5.2
Power Output	70W per channel (8 ohms, 20Hz-20kHz, 0.08% THD)
HDMI Outputs	1
4K/60Hz Pass-through	Yes
Bluetooth	Yes
Dolby Vision	Yes
HDR10	Yes
HDCP 2.3 Support	Yes
HDMI 2.1	No
4K/120Hz pass-through	No
HDR Support	Yes
eARC	Yes
Dolby Technologies	Dolby TrueHD, Dolby Digital Plus
DTS Technologies	DTS-HD Master Audio
Frequency Response	10Hz-100kHz
Total Harmonic Distortion	0.08%
Signal-to-Noise Ratio	98dB
Supported Audio Formats	MP3, WMA, AAC, FLAC, ALAC, WAV
Input Sensitivity/Impedance	200 mV / 47 kΩ
Dimensions (W x H x D)	434 x 151 x 319 mm
Weight	7.5 kg