Denon AVR-S570BT User Manual

Menu map
When using menu operations, connect this unit to a TV and operate this unit while viewing the TV.
The recommended settings are configured for this unit by default. You can customize this unit based on your existing system and your preferences.
Setting items Detailed items Description Page
Audio
Surround Parameter Adjusts surround sound parameters. 74
Restorer Expands the low and high frequency components of compressed audio content such as
MP3 files to enable richer audio playback.
77
Volume Make volume settings. 78
Room EQ Set whether to use the equalizer or not. 79
Video
HDMI Setup Makes settings for HDMI Audio Out, HDMI Pass Through and HDMI Control settings. 80
HDMI Upscaler Sets the mode for upscaling 1080p and 4K HDMI content to 8K. 83
Screen Saver Sets the screen saver setting. 84
4K/8K Signal Format Sets signal format options for your 4K or 8K video equipment. 84
HDCP Setup Sets the HDCP version for each HDMI input source. 86
Contents Connections Playback Settings Tips Appendix
70
Front panel Display Rear panel Remote Index

Denon AVR-S570BT Specifications

General

Channels	5.2
Power Output	70W per channel (8 ohms, 20Hz-20kHz, 0.08% THD)
HDMI Outputs	1
4K/60Hz Pass-through	Yes
Bluetooth	Yes
Dolby Vision	Yes
HDR10	Yes
HDCP 2.3 Support	Yes
HDMI 2.1	No
4K/120Hz pass-through	No
HDR Support	Yes
eARC	Yes
Dolby Technologies	Dolby TrueHD, Dolby Digital Plus
DTS Technologies	DTS-HD Master Audio
Frequency Response	10Hz-100kHz
Total Harmonic Distortion	0.08%
Signal-to-Noise Ratio	98dB
Supported Audio Formats	MP3, WMA, AAC, FLAC, ALAC, WAV
Input Sensitivity/Impedance	200 mV / 47 kΩ
Dimensions (W x H x D)	434 x 151 x 319 mm
Weight	7.5 kg