Denon AVR-S730H User Manual

Setting items Detailed items Description Page
.
Inputs
Input Assign Changes input connector assignment. 155
Source Rename Changes the display name for input source. 157
Hide Sources Removes from the display input sources that are not used. 157
Source Level Adjusts the playback level of the audio input. 157
Input Select Sets the audio input mode. 158
.
Speakers
Audyssey
®
Setup
The acoustic characteristics of the connected speakers and listening room are
measured and the optimum settings are made automatically.
159
Manual Setup
Sets up the speakers manually or changes the Audyssey
®
Setup settings.
170
.
Network
Information Displays network information. 179
Connection Selects whether to connect the home network to a wireless LAN or a wired LAN. 179
Settings Used for manually setting the IP address. 181
Network Control Enables network communication in standby power mode. 183
Friendly Name The “Friendly Name” is the name of this unit displayed on the network. You can change
the Friendly Name according to your preferences.
183
Diagnostics Used to check the network connection. 184
Contents Connections Playback Settings Tips Appendix
129
Front panel Display Rear panel Remote Index

Denon AVR-S730H Specifications

General

Channels	7.2
Power Output (6 ohm, 1 kHz, 0.7% 2ch Drive)	110W
Power Output (6 ohm, 1 kHz, 10% 1ch Drive)	165W
HDMI Inputs	6
HDMI Outputs	1
Dolby Atmos	Yes
DTS:X	Yes
DTS Virtual:X	Yes
Wi-Fi	Yes
Bluetooth	Yes
HEOS Multi-room	Yes
4K Ultra HD Pass-through	Yes
HDR Support	Yes (HDR10, Dolby Vision, HLG)
Auto Speaker Calibration	Audyssey MultEQ
AirPlay	Yes (AirPlay 2)
Internet Radio	Yes
Phono Input	No
Ethernet Port	Yes
Power Output per Channel	75W (8 ohm, 20Hz-20kHz, 0.08% 2ch Drive)
USB Input	1 (Front)