Menu map
When using menu operations, connect this unit to a TV and operate this unit while viewing the TV.
The recommended settings are configured for this unit by default. You can customize this unit based on your existing system and your preferences.
Setting items Detailed items Description Page
.
Audio
Dialog Level This setting adjusts the output level to clarify the dialogue output from the center
channel.
133
Subwoofer Level This setting adjusts the volume level for the subwoofer. 133
Surr.Parameter Adjusts surround sound parameters. 134
Restorer Expands the low and high frequency components of compressed audio content such as
MP3 files to enable richer audio playback.
138
Audio Delay Compensates for incorrect timing between video and audio. 139
Volume Sets the MAIN ZONE (room where the unit is located) volume setting. 140
Audyssey
Makes Audyssey MultEQ
®
, Audyssey Dynamic EQ
®
and Audyssey Dynamic Volume
®
settings.
141
Manual EQ Uses the graphic equalizer to adjust the tone of each speaker. 143
.
Video
HDMI Setup Makes settings for HDMI Audio Out, HDMI Pass Through and HDMI Control settings. 146
On Screen Disp. Configures the on-screen display settings. 151
4K Signal Format Set the 4K signal format when the TV or playback device is 4K compatible. 152
TV Format Sets the video signal format to be output for the TV you are using. 154
Contents Connections Playback Settings Tips Appendix
Settings
128
Front panel Display Rear panel Remote Index
To Next Page
Loading...
Need help?
General
