Denon AVR-S730H User Manual

Surr.Parameter
You can adjust the surround audio sound field effects to match your
preferences.
The items (parameters) that can be adjusted depend on the signal being
input and the currently set sound mode. For details on the adjustable
parameters, see “Sound modes and surround parameters” (v
p. 229).
0
Some setting items cannot be set while playback is stopped. Make the settings
during playback.
0
“Surr.Parameter” settings are stored for each sound mode.
o
Cinema EQ
Gently softens the upper treble range of movie soundtracks to reduce
possible harshness and improve clarity.
On:
“Cinema EQ” is used.
Off
(Default):
“Cinema EQ” is not used.
o
Loudness Mngmt
This sets whether to output as specified in “Dynamic Comp.” or output
directly without compressing the dynamic range of audio recorded in
the disc.
On
(Default):
Outputs are given based on enabling the
settings made in “Dynamic Comp.” and
Dialogue normalization function.
Off:
“Dynamic Comp.” settings and Dialogue
normalization are disabled, and the
signals on the disc are output as is.
0
“Loudness Mngmt” can be set when Dolby Digital, Dolby Digital Plus, Dolby
TrueHD and Dolby Atmos signal is input.
Contents Connections Playback Settings Tips Appendix
134
Front panel Display Rear panel Remote Index

Denon AVR-S730H Specifications

General

Channels	7.2
Power Output (6 ohm, 1 kHz, 0.7% 2ch Drive)	110W
Power Output (6 ohm, 1 kHz, 10% 1ch Drive)	165W
HDMI Inputs	6
HDMI Outputs	1
Dolby Atmos	Yes
DTS:X	Yes
DTS Virtual:X	Yes
Wi-Fi	Yes
Bluetooth	Yes
HEOS Multi-room	Yes
4K Ultra HD Pass-through	Yes
HDR Support	Yes (HDR10, Dolby Vision, HLG)
Auto Speaker Calibration	Audyssey MultEQ
AirPlay	Yes (AirPlay 2)
Internet Radio	Yes
Phono Input	No
Ethernet Port	Yes
Power Output per Channel	75W (8 ohm, 20Hz-20kHz, 0.08% 2ch Drive)
USB Input	1 (Front)