Need help?Do you have a question about the Denon AVR-488 and is the answer not in the manual?
General| Channels | 5.1 |
|---|---|
| Total Harmonic Distortion | 0.08% |
| Frequency Response | 10 Hz - 100 kHz |
| Input Impedance | 47 kohms |
| HDMI Inputs | 3 |
| HDMI Outputs | 1 |
| Signal-To-Noise Ratio | 100 dB |
| Input Sensitivity | 200 mV |
| Tuner Bands | AM/FM |
| Digital Audio Inputs | 2 Optical, 1 Coaxial |
| Audio D/A Converter | 192kHz/24bit |
| Dimensions (W x H x D) | 434 x 151 x 329 mm |
| Power Output (per channel) | 75W (8 ohms, 20Hz-20kHz, 0.08% THD) |
Critical warnings about electric shock and opening the unit to prevent hazards.
Warnings to prevent fire or shock by avoiding exposure to rain and moisture.
Comprehensive safety and operating instructions for user reference and future use.
Explanation of buttons, knobs, and input/output connectors on the front of the AVR-488.
Meaning and function of indicators shown on the AVR-488's front display.
Guidance on choosing appropriate cables for audio, video, and HDMI connections.
A visual guide to the main menu categories: System Setup, Parameter, and Information.
Illustrative examples of information displayed on the front panel.
Step-by-step instructions for navigating and making settings within the System Setup menu.
How default values are indicated in the system setup menus.
Setting front, center, and surround speaker sizes based on bass capability.
Defining how the subwoofer handles LFE and low-frequency signals.
Measuring and setting distances from listening position to each speaker.
Assigning HDMI connectors to specific input sources.
Assigning digital audio inputs (Coaxial, Optical) to sources.
Assigning the iPod Control Dock to an input source.
Adjusting the subwoofer level for external inputs.
Automatically programming radio stations into memory.
Adjusting XM radio reception sensitivity and checking signal strength.
The default mode for enjoying surround sound based on the source material.
Selecting surround modes like DOLBY PLII, DTS NEO:6, and Neural for stereo sources.
Decoding and playing multi-channel formats such as Dolby Digital and DTS.
Utilizing DENON's unique surround modes for enhanced audio realism.
Adjusting MODE, D.COMP, LFE, CENTER IMAGE, PANORAMA, and more.
Checking current settings like surround mode and source.
Information on the type, format, and signal level of incoming audio.
Instructions for turning the unit on, off, and entering standby mode.
Information about XM Radio's features and subscription.
Steps for selecting XM and tuning stations.
How to verify signal quality and locate the XM Radio ID.
Listening to one source while recording another using the REC OUT function.
Fine-tuning the volume level for individual speakers.
Using the remote to control DENON audio devices.
Programming the remote to operate components from other manufacturers.
Using the remote after programming specific component codes.
Illustrative examples of speaker layouts for optimal surround sound.
Explanations of Dolby Digital and Dolby Pro Logic II processing.
Explanations of DTS Digital Surround, NEO:6, and 96/24 formats.
Details on Neural Surround's immersive audio capabilities.
Explanation of the HDMI standard for digital A/V connections.
Information on enhanced color space technologies for video.
To Next Page
