Why doesn't the “DOLBY DIGITAL” indicator appear on my Denon AVR-4310 Receiver?
If the “DOLBY DIGITAL” indicator does not appear on the display of your Denon Receiver, check the Blu-ray Disc player / DVD player’s audio output setting. Refer to the Blu-ray Disc player / DVD player’s operating instructions for details.
Why is there no sound from my Denon Receiver speakers?
If no sound is coming from the speakers connected to your Denon Receiver, check the connections to the input devices and speaker cables. Make sure the appropriate input source is selected and the master volume is at a suitable level. Also, ensure mute mode is off and headphones are disconnected, as this will disable sound from the speakers and PRE OUT terminals. If using a digital input, verify the input source is correctly assigned and the input mode is matched to the terminal.
Why is there no sound from the subwoofer on my Denon Receiver?
If your Denon Receiver's subwoofer isn't producing sound, first ensure the subwoofer's power is turned on. Next, check that the subwoofer is set to 'Yes' in the receiver's settings. Verify the subwoofer connections and increase the subwoofer's channel level.
Why is the display off on my Denon Receiver?
If the display on your Denon Receiver is off, set the dimmer function to a setting other than “OFF”. Also, cancel the PURE DIRECT mode, as the display turns off in Pure Direct mode.
Why is there no sound from the surround back speaker on my Denon Receiver?
If there's no sound from the surround back speaker on your Denon Receiver, verify that the surround back speaker’s power amplifier assignment is set to “Normal”. Ensure the surround back speakers are set to something other than “None”. Also, set “Surround Parameter” – “Surround Back” to something other than “OFF”, and set the surround mode to the surround playback mode.
Why can't I connect to preset radio stations on my Denon Receiver?
If you cannot connect to preset or favorite radio stations on your Denon Receiver, it may be because the radio station is not currently broadcasting or is not currently in service. Wait a while before trying again.
How to delete tracks from 'My Library' on Denon Receiver AVR-4310?
You cannot delete Tracks, Playlists, or Channels registered in “My Library” directly from the Denon Receiver AVR-4310. Use a PC application to delete them.
Why is the sound broken during playback on my Denon Receiver?
If the sound is broken during playback on your Denon Receiver, this is not a malfunction. When playing broadcast data with a high bit rate, the sound may be disrupted depending on the communications conditions.
Why does my Denon Receiver AVR-4310 mirror operations of connected devices?
If your Denon Receiver AVR-4310 performs the same operations as a connected device (like power on/off, switching audio output, adjusting volume, or switching input source), set “HDMI Control” – “Control” to “OFF”. If you only want to control the power on/off, set “Power Off Control” to “OFF”.
How to output sound from HDMI connected monitor on Denon Receiver?
If no sound is being output from the monitor connected via HDMI to your Denon Receiver, set “HDMI Audio Out” to “TV”.
General| Equalizer | Yes |
|---|---|
| Product color | Black |
| Impedance | 8 Ω |
| Frequency range | 10 - 100000 Hz |
| Audio output channels | 7.1 channels |
| Total Harmonic Distortion (THD) | 0.05 % |
| S-Video inputs quantity | 7 |
| Component video (YPbPr/YCbCr) in | 3 |
| Dimensions (WxDxH) | 434 x 414 x 171 mm |
| HDMI ports quantity | 6 |
| Headphone outputs | 1 |
| Headphone connectivity | 3.5 mm |
| S-Video outputs quantity | 2 |
| Power consumption (standby) | 1 W |
| Power consumption (typical) | 780 W |
Weight and Dimensions| Weight | 15800 g |
|---|
To Next Page
