Denon AVR-4310 User Manual

0
Getting Started Connections Playback Remote ControlMulti-zone Information Troubleshooting Specifications
ENGLISH
Making the Input Settings (Source Select)
Setting items Setting contents
Repeat
Make settings for repeat
mode.
All : Repeat all songs.
One : Repeat the current song.
OFF : Cancel repeat mode.
Shuffle
Make settings for shuffle
mode.
Songs : Shuffle all songs.
Albums : Shuffle songs from current album only.
OFF : Cancel shuffle mode.
This can be set for the input source for which “iPod dock” is assigned at “Input Assign” (
v
page 48).
Setting contents
–12dB ~ +12dB (0dB)
The analog input level and digital input level can be adjusted independently for input sources for
which “HDMI” or “Digital” is assigned at “Input Assign“ (vpage 47).
Corrects the playback level of the selected input source’s audio input.
Set this if there are differences in the input volume levels between the different sources.
•
•
Correcting the Input Source’s Playback Level
(Source Level)
Default settings are underlined.
When the input source is “
NET/USB
(
Favorites
)
Internet Radio Media Server USB/iPod
Napster
TUNER
(
iPod
)
”, the corresponding screen can be displayed.
Displaying the Playback Screen for the Different
Input Sources (Play)
Setting the iPod with iPod Dock Playback Mode
(Playback Mode)
Setting items Setting contents
Rename
Change the display name of
the selected input source.
1. Press p or ENTER.
2. Use o p to set the cursor to the character you want to change.
3. Use ui to change the character, then press ENTER.
Up to 8 characters can be input.
The input character type can be switched by pressing [SEARCH] or
MENU while the display name is being changed.
The types of characters that can be input are as shown below.
GUpper case charactersH ABCDEFGHIJKLMNOPQRSTUVWXYZ
GLower case charactersH abcdefghijklmnopqrstuvwxyz
GSymbolsH ! # % & ‘ ( ) * + , - . / : ; < = “ > ? @ [ \ ] (Space)
GNumbersH 0123456789
4. Repeat steps 2 and 3 to change the display name.
•
•
•
Default
Reset all settings to factory
default.
Yes : Reset to the defaults.
No : Do not reset to the defaults.
Changing the Input Source’s Display Name (Rename)
Main remote control
operation buttons
:Displaying the menu
Cancel the menu
:Moves the cursor
(Up/Down/Left/Right)
:Confirm the setting :Return to previous menu
Setting items Setting contents
USB Select
Set the USB port to be
used.
Front : Select front-panel port.
Rear : Select rear-panel port.
Direct Play
Use DIRECT PLAY on the
sub remote control unit to
set the folder to be played.
Favorites : Play songs registered as “Favorites”.
All Music : Play the songs saved on the PC media.
This can be set when the input source is
NET/USB
.
Setting the NET/USB Playback Mode
(Playback Mode)
Default settings are underlined.
Setting items Setting contents
Repeat
Make settings for repeat
mode.
All : Repeat all files.
One : Repeat the current file.
OFF : Cancel repeat mode.
Random
Make random mode
settings.
ON : Enable random playback.
OFF : Disable random playback.
This can be set when the input source is
Media Server USB/iPod Napster
.
Setting the Media Server, USB/iPod and Napster
Playback Mode (Playback Mode)
Settings

Denon AVR-4310 Specifications

General

Equalizer	Yes
Product color	Black
Impedance	8 Ω
Frequency range	10 - 100000 Hz
Audio output channels	7.1 channels
Total Harmonic Distortion (THD)	0.05 %
S-Video inputs quantity	7
Component video (YPbPr/YCbCr) in	3
Dimensions (WxDxH)	434 x 414 x 171 mm
HDMI ports quantity	6
Headphone outputs	1
Headphone connectivity	3.5 mm
S-Video outputs quantity	2
Power consumption (standby)	1 W
Power consumption (typical)	780 W

Weight and Dimensions

Weight	15800 g