Denon AVR-4810

Questions and Answers:

M
Michael WallAug 20, 2025
How to fix no sound from speakers on Denon AVR-4810?
- N
  nmitchellAug 20, 2025
  If no sound is coming from the speakers connected to your Denon Receiver, first check the connections to the input devices and speaker cables. Then, verify the connections to the playback devices and select the correct input source. Ensure the master volume is at an appropriate level and that mute mode is off. Also, disconnect any headphones. If using digital input, select an input source for which the digital input setting has been configured and match the terminal to which the digital input is assigned with the input mode.
P
Peter CrossAug 22, 2025
How to troubleshoot Denon AVR-4810 Receiver remote control issues?
- J
  Jason AguirreAug 22, 2025
  If your Denon Receiver is not working properly when using the remote control, first replace the batteries with new ones. Ensure you are operating the remote within 7 meters of the AVR-4810 and at an angle within 30 degrees. Remove any obstacles between the remote and the receiver. Verify the batteries are inserted correctly, matching the polarity marks. Move the unit if the remote sensor is exposed to strong light. Ensure the remote control IDs of the main unit and remote match, and set the remote's function button properly.
M
mhayesAug 23, 2025
What to do if Denon AVR-4810 Receiver won't turn on?
- R
  Ronald RodriguezAug 23, 2025
  If your Denon Receiver AVR-4810 does not turn on, or turns off immediately after being turned on, ensure that the power plugs are securely inserted into the receiver's AC inlet and the wall power outlet.
M
Mark GarciaAug 26, 2025
Why is there no sound from the center speaker on my Denon Receiver?
- S
  Shane RobertsAug 26, 2025
  If no sound is coming from the center speaker of your Denon Receiver, when playing monaural audio sources, select a surround mode other than “STANDARD” (Dolby/DTS Surround).
V
Victoria GuzmanAug 27, 2025
Why no sound from surround back speaker on Denon Receiver?
- D
  Dan DrakeAug 27, 2025
  If there is no sound being produced from the surround back speaker on your Denon Receiver, verify that the surround back speaker’s power amplifier assignment is set to “Normal”. Ensure the surround back speakers are set to something other than “None”. Also, set “Surround Parameter” – “Surround Back” to something other than “OFF”. Finally, ensure the surround mode is set to the surround playback mode.
R
Rachel LopezAug 29, 2025
How to troubleshoot no sound from subwoofer on Denon AVR-4810 Receiver?
- M
  Maria EnglishAug 29, 2025
  If there's no sound coming from the subwoofer connected to your Denon Receiver, first, turn on the subwoofer's power. Then, set the subwoofer to “Yes”. Check the subwoofer connections and increase the subwoofer's channel level.
M
Melissa GallowaySep 1, 2025
Why is there no picture with HDMI on my Denon Receiver?
- M
  Matthew CarlsonSep 1, 2025
  If no picture appears when using HDMI connections on your Denon Receiver AVR-4810, start by checking the HDMI connector connections. Ensure you've selected the input source assigned to the HDMI terminal. Verify that the connected monitor is compatible with copyright protection (HDCP). Also, check that the output format of the connected player matches the TV's compatible input formats.
G
Gerald KeySep 2, 2025
How to fix no picture on Denon AVR-4810 Receiver?
- G
  Gloria Chandler DDSSep 3, 2025
  If there's no picture appearing on your Denon Receiver AVR-4810, check the connections of the video output terminals on the receiver and the input terminals on your TV. Ensure you have made the correct input setting for the TV input terminals connected to the receiver. Cancel the PURE DIRECT mode. Also, check the “Video Select” setting.
B
Brian ContrerasSep 4, 2025
How to turn on display on Denon AVR-4810 Receiver?
- D
  Daniel PierceSep 5, 2025
  If your Denon Receiver display is off, set “Dimmer“ to a setting other than “OFF“. Alternatively, cancel the PURE DIRECT mode.
S
Sandra AlvarezSep 6, 2025
Why isn't Dolby Digital showing on my Denon Receiver?
- V
  Vanessa TurnerSep 7, 2025
  If the “DOLBY DIGITAL” indicator does not appear on the display of your Denon Receiver, check the audio output setting of your Blu-ray Disc player or DVD player.

Denon AVR-4810 Specifications

General

Impedance	8 Ω
Frequency range	10 - 100000 Hz
Audio output channels	7.1 channels
Total Harmonic Distortion (THD)	0.05 %
Equalizer	Yes
Product color	Black
S-Video inputs quantity	7
Component video (YPbPr/YCbCr) in	3
HDMI ports quantity	6
Connectivity technology	Wired & Wireless
Headphone connectivity	3.5 mm
Digital audio optical out	1