Denon AVR-4810 User Manual


Getting Started Connections Settings Playback Remote ControlMulti-zone Information Troubleshooting SpecificationsConnections
ENGLISH
NOTE
Insert the AC plugs securely. Incomplete connections could cause
noise.
Only use the AC outlet to plug in audio equipment. Do not use
them as power supplies for hairdryers or anything other than audio
equipment.
•
•
Wait until all connections have been completed before connecting the
power cord.
To household power
outlet
(AC 230 V, 50 Hz)
Power cord
(included)
Connection to the AC outlet
These outlet supply power to external
audio equipment.
Audio equipment with a total power
consumption of 100 W (0.43 A) can be
connected.
The power supply turns on and off
together with <ON/STANDBY>. When
set to “ON”, power is supplied from
the outlet. When set to “STANDBY”,
no power is supplied.
•
•
•
Connecting the Power Cord
Once Connections are
Completed
1
Press <POWER>.
The power indicator lights red and the power is set to the
standby mode.
2
Press [MAIN] to switch the main remote control unit
to “MAIN” mode (vpage 99 “Operating the Main
Remote Control Unit”).
3
Press <ON/STANDBY> or [POWER ON].
The power indicator flashes green and the power turns on.
Also press [INPUT SOURCE SELECT] or QUICK SELECT when in
standby mode, the power turns on.
When [INPUT SOURCE SELECT] has been pressed, the input
source set with the [INPUT SOURCE SELECT] is set. If a QUICK
SELECT has been pressed, the input source stored in the memory
for the quick select function is set (vpage 91 “Saving Frequently
Used Settings (Quick Select Function)”).
b
NOTE
Power continues to be supplied to some of the circuitry even when the
power is in the standby mode. When leaving home for long periods of
time or when traveling, either press <POWER> to turn off the power,
or unplug the power cord from the power outlet.
1
Press [MAIN] to switch the main remote control unit
to “MAIN” mode (vpage 99 “Operating the Main
Remote Control Unit”).
2
Press <ON/STANDBY> or [POWER OFF].
The power is set to the standby mode.
3
Press <POWER>.
The power indicator turns off, and so does the power.
Turning the Power Off
Turning the Power On
Button located on both the main unit
and the remote control unit BUTTON
Button only on the main unit <BUTTON>
Button only on the remote control unit [BUTTON]
Symbols used to indicate buttons in this manual
[INPUT
SOURCE
SELECT]
[POWER ON]
QUICK SELECT
[POWER OFF]
[ MAIN]
QUICK SELECT
<ON/STANDBY> <POWER>

Denon AVR-4810 Specifications

General

Impedance	8 Ω
Frequency range	10 - 100000 Hz
Audio output channels	7.1 channels
Total Harmonic Distortion (THD)	0.05 %
Equalizer	Yes
Product color	Black
S-Video inputs quantity	7
Component video (YPbPr/YCbCr) in	3
HDMI ports quantity	6
Connectivity technology	Wired & Wireless
Headphone connectivity	3.5 mm
Digital audio optical out	1

Weight and Dimensions

Weight	19100 g