Name: Denon AVR-S730H
Brand: Denon
Rating: 5 (1 reviews)

To Next Page

To Previous Page

TV Format

Set the video signal format to be output for the TV you are using.

Format

NTSC

(Default):

Select NTSC output.

PAL: Select PAL output.

“Format” can also be set by the following procedure. However, the menu

screen is not displayed. Following the display content to make the setting.

1. Press and hold the main unit’s TUNER PRESET CH + and TUNE + at the

same time for at least 3 seconds.

“V.Format:<NTSC>” appears on the display.

2. Use the main unit’s TUNER PRESET CH + or TUNER PRESET CH - and

set the video signal format.

3. Press the main unit’s STATUS to complete the setting.

NOTE

When a format other than the video format of the connected TV is set, the

picture will not be displayed properly.

Contents Connections Playback Settings Tips Appendix

154

Front panel Display Rear panel Remote Index

Other manuals for Denon AVR-S730H

Questions and Answers:

Need help?

Do you have a question about the Denon AVR-S730H and is the answer not in the manual?

General