Name: Denon AVR-S730H
Brand: Denon
Rating: 5 (1 reviews)

To Next Page

To Previous Page

When setting this to “Enhanced”, we recommend using a “Premium High

Speed HDMI Cable” or “Premium High Speed HDMI Cable with Ethernet” that

has an “HDMI Premium Certified Cable” label attached to the product

package.

When this setting is “Enhanced”, configure the television or playback device

settings to match this setting.

When this setting is “Enhanced”, video may not be output correctly depending

on the connected playback device or HDMI cable. In this case, change this

setting to “Standard”.

“Custom” is displayed for the setting item if our service engineers or custom

installers has configured the HDMI signal format for this unit.

“4K Signal Format” can also be set by the following procedure. However, the

menu screen is not displayed. Watch the display while configuring the setting.

1. Press and hold the main unit’s ZONE2 SOURCE and STATUS at the same

time for at least 3 seconds.

“V.Format:<NTSC>” appears on the display.

2. Press the main unit's DIMMER.

“4K :<Standard>” appears on the display.

3. Use the main unit's TUNER PRESET CH + or TUNER PRESET CH - and

select the 4K Signal Format.

4. Press the main unit’s STATUS to complete the setting.

Contents Connections Playback Settings Tips Appendix

153

Front panel Display Rear panel Remote Index

Other manuals for Denon AVR-S730H

Questions and Answers:

Need help?

Do you have a question about the Denon AVR-S730H and is the answer not in the manual?

General