Video
Make video-related settings.
Picture Adjust
Picture quality can be adjusted.
0
This can be set when “HDMI” is assigned for each input source. (v p. 171)
0
“Contrast”, “Brightness”, “Saturation”, “Noise Reduction” and “Enhancer” can be
set when “Picture Mode” is set to “Custom”. (v p. 157)
0
“Picture Adjust” settings are stored for each input source.
0
“Picture Adjust” cannot be set when 4K signals are input.
0
This cannot be set when “Video Mode” is set to “Bypass” or “i/p Scaler” is set to
“Off”. (v p. 165)
o
Picture Mode
Select the desired picture mode according to the video content and
your viewing environment.
Standard:
The standard mode suited for most living
room viewing environments.
Movie:
A mode suited for watching movies in a
dark room such as a theater room.
Vivid:
A mode that makes graphic images for
games, etc. brighter and more vivid.
Streaming:
A mode suited for low bit rate video
sources.
Custom: Adjusts the picture quality manually.
Off
(Default):
No picture quality adjustment is done with
this unit.
0
These settings can also be configured using “Picture Mode” in the option
menu. (v p. 157)
Contents Connections Playback Settings Tips Appendix
157
Front panel Display Rear panel Remote Index
To Next Page
Loading...
Need help?
General
