EasyManuals Logo

Denon AVR-S960H User Manual

Denon AVR-S960H
279 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #205 background imageLoading...
Page #205 background image
o
DHCP
Selects how to connect to the network.
On
(Default):
Configure the network settings
automatically from your router.
Off: Configure the network settings manually.
o
IP Address
Set the IP address within the ranges shown below.
0
The Network Audio function cannot be used if other IP addresses
are set.
CLASS A: 10.0.0.1 - 10.255.255.254
CLASS B: 172.16.0.1 - 172.31.255.254
CLASS C: 192.168.0.1 - 192.168.255.254
o
Subnet Mask
When connecting an xDSL modem or connector adapter directly to
this unit, input the subnet mask indicated in the documentation
supplied by your provider. Normally input “255.255.255.0”.
o
Default Gateway
When connected to a gateway (router), input its IP address.
o
DNS
Enter the DNS address indicated in the documentation supplied by
your provider.
0
If you cannot connect to the Internet, recheck the connections and settings.
(v p. 63)
0
If you do not understand about Internet connection, contact your ISP (Internet
Service Provider) or the store from which you purchased your computer.
Contents
Connections Playback Settings Tips Appendix
205
Front panel Display Rear panel Remote Index

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Denon AVR-S960H and is the answer not in the manual?

Denon AVR-S960H Specifications

General IconGeneral
DisplayVFL
HDCP version2.3
Apple dockingNo
Product colorBlack
Audio decodersDTS Virtual:X, DTS:X
Volume controlRotary
Receiver typestereo
Frequency range10 - 100000 Hz
Input sensitivity200 mV
Audio output channels7.2 channels
Signal-to-Noise Ratio (SNR)100 dB
Total Harmonic Distortion (THD)0.08 %
Power output per channel (1KHz@6 Ohm)145 W
Power output per channel (20-20KHz@8 Ohm)95 W
Connectivity technologyWired & Wireless
Speakers connectivity typeRCA
AC input voltage230 V
AC input frequency50 Hz
Power consumption (standby)0.1 W
Power consumption (typical)460 W
Package weight11500 g
AM band range520 - 1710 kHz
FM band range87.5 - 107.9 MHz
Supported radio bandsAM, FM
HDMI in7
Audio (L/R) in4
Digital audio optical in2
Ethernet LAN (RJ-45) ports1
3D-
Package depth429 mm
Package width520 mm
Package height243 mm
Weight and Dimensions IconWeight and Dimensions
Depth330 mm
Width434 mm
Height167 mm
Weight9500 g

Related product manuals