EasyManuals Logo

Denon AVR-X1300W Service Manual

Denon AVR-X1300W
169 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #95 background imageLoading...
Page #95 background image
In order to check, connect the player and the TV to the HDMI terminal and congure as AVR source.
Check sound output by turning on the player and the TV.
HDMI OUT
HDMI IN1
3-6 HDMI Rx/Tx(MN864788) & OSD(ADV7623) failure detection procedure
Check item(52). Check the TMDS CLK detection status of the regis-
ter.
Send the following command from Termite.exe.
Send the transmission command "i 00B2 006A 0001".
The return value is "11".
Go to Yes.
The return value is "00".
Go to No.
Checking the TMDS status of the register. (Rx/Tx -> OSD)
Example
i 00B2 006A 0001
Check item (53). Checking the TMDS input waveform. :
Check the TMDS waveform at the following test point.
Is the waveform like the sample?
23/24/26/27/29/30/32/33 pin
The HDMI Rx/Tx (IC721) is faulty.
Replace with a new device.
Recheck from check item (4).
If it does not work, replace the PCB.
The OSD(IC731) is faulty.
Replace with a new device.
Please check between Monitor Out and TV
Replace with a new device.
YES NO
TMDS Signal
3.3V
Example of waveform in check ①
TMDS
Example of waveform in check ②
YES
95
Caution in
servicing
Electrical Mechanical Repair Information Updating

Other manuals for Denon AVR-X1300W

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Denon AVR-X1300W and is the answer not in the manual?

Denon AVR-X1300W Specifications

General IconGeneral
Display-
Product colorBlack
Audio decodersDSD, Dolby TrueHD
Audio amplifierYes
Multi-Zone quantity2
Apple docking compatibilityNot supported
Receiver typeSurround
Frequency range10 - 100000 Hz
Output impedance16 Ω
Input sensitivity200 mV
Audio output channels7.1 channels
Signal-to-Noise Ratio (SNR)98 dB
Power output per channel (20-20KHz@8 Ohm)145 W
Audio formats supportedAAC, AIFF, ALAC, FLAC, MP3, WAV, WMA
HDMI in6
Digital audio coaxial in0
Ethernet LAN (RJ-45) ports1
Supported video modes2160p
AC input voltage230 V
AC input frequency50 Hz
Power consumption (standby)0.1 W
Power consumption (typical)430 W
AM band range522 - 1611 kHz
FM band range87.5 - 108 MHz
Supported radio bandsAM, FM
Connectivity technologyWired
Speakers connectivity type3.5mm
Optical drive includedNo
Weight and Dimensions IconWeight and Dimensions
Depth339 mm
Width434 mm
Height215 mm
Weight8500 g

Related product manuals