Denon AVR-X3300W User Manual

Menu map
When using menu operations, connect this unit to a TV and operate this unit while viewing the TV.
The recommended settings are configured for this unit by default. You can customize this unit based on your existing system and your preferences.
Setting items Detailed items Description Page
.
Audio
Dialog Level Adjust This setting adjusts the output level to clarify the dialogue output from the center
channel.
155
Subwoofer Level Adjust This setting adjusts the volume level for the subwoofer. 155
Surround Parameter Adjusts surround sound parameters. 156
Restorer Expands the low and high frequency components of compressed audio content such as
MP3 files to enable richer audio playback.
160
Audio Delay Compensates for incorrect timing between video and audio. 161
Volume Sets the MAIN ZONE (room where the unit is located) volume setting. 161
Audyssey
Makes Audyssey MultEQ
®
XT, Audyssey Dynamic EQ
®
and Audyssey Dynamic
Volume
®
settings.
162
Graphic EQ Uses the graphic equalizer to adjust the tone of each speaker. 165
.
Video
Picture Adjust Adjusts picture quality. 167
HDMI Setup Makes settings for HDMI video/audio output. 169
Output Settings Makes settings for video output. 175
On Screen Display Configures the on-screen display settings. 179
TV Format Sets the video signal format to be output for the TV you are using. 180
Contents Connections Playback Settings Tips Appendix
Settings
149
Front panel Display Rear panel Remote Index

Denon AVR-X3300W Specifications

General

Receiver type	Surround
Frequency range	10 - 100000 Hz
Pre-out channels	7.2
Pre-out connectivity	Yes
Audio output channels	7.2 channels
Signal-to-Noise Ratio (SNR)	100 dB
Total Harmonic Distortion (THD)	0.05 %
Power output per channel (1KHz@6 Ohm)	180 W
Power output per channel (20-20KHz@8 Ohm)	105 W
AC input voltage	230 V
AC input frequency	50 Hz
Power consumption (standby)	0.1 W
Power consumption (typical)	600 W
Product color	Black
Audio decoders	DTS-HD, DTS-HD Master Audio, Dolby TrueHD
Multi-Zone quantity	2
Apple docking compatibility	-
AM band range	522 - 1611 kHz
FM band range	87.5 - 108 MHz
Supported radio bands	AM, FM
HDMI in	8
Audio (L/R) in	5
Remote control in	1
Composite video in	3
Composite video out	0
Connectivity technology	Wired
Speakers connectivity type	Clamp terminals
Audio formats supported	AAC, AIFF, ALAC, DSD, FLAC, MP3, WAV, WMA

Weight and Dimensions

Depth	389 mm
Width	434 mm
Height	167 mm
Weight	10800 g