ZONE2 Setup / ZONE3 Setup
Makes settings for audio playback with ZONE2 and ZONE3.
0
Values set for “Volume Limit” and “Power On Volume” are displayed according to
the setting specified for the volume “Scale” (v
p. 184).
o
Bass
Adjust bass.
-10dB – +10dB (Default : 0dB)
o
Treble
Adjust treble.
-10dB – +10dB (Default : 0dB)
o
High Pass Filter
Make settings for cutting the low range to reduce distortion in the bass.
On:
The low range is attenuated.
Off
(Default):
The low range is not attenuated.
o
Lch Level
Adjust the left channel output level.
-12 dB – +12 dB (Default : 0 dB)
o
Rch Level
Adjust the right channel output level.
-12 dB – +12 dB (Default : 0 dB)
o
Channel
Set whether to playback in stereo or monaural.
Stereo
(Default):
Stereo playback.
Mono: Monaural playback.
Contents Connections Playback Settings Tips Appendix
250
Front panel Display Rear panel Remote Index
To Next Page
Loading...
Need help?
General
Weight and Dimensions
