Need help?Do you have a question about the Denon AVR-X1000 and is the answer not in the manual?
General| Receiver type | - |
|---|---|
| Frequency range | 10 - 100000 Hz |
| Pre-out channels | 1 SW |
| Input sensitivity | 200 mV |
| Pre-out connectivity | Yes |
| Audio output channels | 5.1 channels |
| Signal-to-Noise Ratio (SNR) | 98 dB |
| Total Harmonic Distortion (THD) | 0.08 % |
| Power output per channel (1KHz@6 Ohm) | 145 W |
| Power output per channel (20-20KHz@8 Ohm) | 80 W |
| HDMI in | 5 |
| Composite video in | 2 |
| Ethernet LAN (RJ-45) ports | 1 |
| Multichannel audio output type | RCA |
| Connectivity technology | Wired |
| AM antenna ports quantity | 0 |
| Speakers connectivity type | Binding post |
| Audio formats supported | AAC, FLAC, MP3, WAV, WMA |
| Image formats supported | JPS |
| Wi-Fi | No |
| Supported radio bands | FM |
| Internet radio services supported | vTuner |
| Product color | Black |
| Audio decoders | Dolby Digital EX, Dolby Pro Logic IIx, Dolby TrueHD, DTS 96/24, DTS-ES, DTS-HD Master Audio |
| Volume control | Rotary |
| Apple docking compatibility | iPhone |
| Number of products included | 1 pc(s) |
| AC input voltage | 230 V |
| AC input frequency | 50 Hz |
| Power consumption (standby) | 0.1 W |
| Power consumption (typical) | 390 W |
| Cables included | AC |
Weight and Dimensions| Depth | 330 mm |
|---|---|
| Width | 434 mm |
| Height | 151 mm |
| Weight | 8200 g |
Explains the high quality sound output and discrete circuit technology.
Details high performance aspects like internet radio, streaming, and HDMI connectivity.
Identifies and explains the controls and indicators on the unit's front panel.
Explains the primary display area showing input source and status.
Indicates reception conditions when the input source is "TUNER".
Lights up when specific Audyssey settings are active.
Turns the power of ZONE2 on/off.
Buttons used to select the input source.
Buttons used to select the sound mode.
Describes the types of cables needed for various connections.
Explains how to position speakers in the room for optimal sound.
Instructions on how to turn the unit on and switch to standby.
Guides on selecting the desired input source for playback.
Details functions accessible via the OPTION button, like repeat and random playback.
Displays photographs popular by user comments or favorites.
Displays the most recently added photographs.
Allows searching for photographs by keyword.
Creates a new station based on the track or artist.
Bookmarks the artist currently being played.
Bookmarks the track currently being played.
Details streaming music from Apple devices via AirPlay.
Lists and describes Dolby sound modes.
Lists and describes DTS sound modes.
Step-by-step guide to enable and configure HDMI control functions.
Explains how to set and cancel the sleep timer.
Describes how to activate saved Quick Select settings.
Guides on saving current settings to Quick Select buttons.
Steps to access and control the unit via a web browser interface.
Explains how to connect to ZONE2 for audio playback.
Turns the ZONE2 power on or off.
Selects the input source for ZONE2 playback.
Lists audio-related settings with descriptions and page numbers.
Enables or disables tone adjustment (bass and treble).
Adjusts the bass level.
Adjusts the treble level.
Sets the Restorer function level (High, Medium, Low, Off).
Sets how the master volume level is displayed.
Sets a maximum volume limit.
Defines the volume setting active when the power is turned on.
Compensates for room acoustics to optimize speaker performance.
Solves sound quality deterioration due to volume decrease.
Selects whether to adjust tones for individual or all speakers.
Adjusts tonal balance for each frequency band.
Makes settings for HDMI video/audio output.
Automatically compensates for timing shift in audio and video output.
Selects the HDMI audio output device.
Sets where to display the master volume level.
Displays status of operation when sound mode or input source changes.
Sets how long each menu is displayed for specific input sources.
Changes input connector assignments for input sources.
Shows examples of the Input Assign menu screen.
Sets the audio input modes for different sources.
Performs automatic measurement and setup for optimal speaker performance.
Sets speaker presence and size categories.
Sets the size category for the front speakers.
Sets the presence and size category for the center speaker.
Sets the distance from the listening position to each speaker.
Outputs a test tone to adjust speaker volume levels.
Sets the maximum frequency for bass signal output to the subwoofer.
Selects low-range signals to be reproduced by the subwoofer.
Displays network information like IP address and MAC address.
Enables network communication in standby power mode.
Edits the unit's name displayed on the network.
Restores the Friendly Name to its default setting.
Selects how to connect to the network (automatic or manual).
Checks the physical LAN port connection.
Checks the connection from this unit to the router.
Checks whether this unit has access to the Internet (WAN).
Sets the language for display on the menu screen.
Sets the audio to play back with multi-zone (ZONE2).
Adjusts the display brightness of this unit.
Shows audio information for MAIN ZONE.
Shows HDMI input/output signals and monitor information.
Shows information about current settings for MAIN ZONE and ZONE2.
Selects preferences for notification messages.
Updates the firmware of the receiver.
Displays firmware update notifications on TV screen.
Provides solutions to common user questions and desired settings.
Troubleshoots power-related issues and protection circuit activation.
Troubleshoots issues with remote control functionality.
Troubleshoots issues where the unit's display is blank.
Addresses issues where the maximum volume cannot be reached.
Troubleshoots sound issues with HDMI connections.
Troubleshoots issues where no video signal is displayed on the TV.
Troubleshoots issues with connecting iPods via USB.
Troubleshoots AirPlay icon visibility issues on Apple devices.
Troubleshoots "No Connection" errors with USB memory devices.
Troubleshoots issues where files on USB devices are not shown.
Troubleshoots issues with displaying Internet Radio station lists.
Troubleshoots issues where Internet Radio stations fail to play.
Troubleshoots issues playing files stored on a computer.
Troubleshoots server connection errors.
Explains HDMI Deep Color technology for enhanced color depth.
Describes "x.v.Color" function for accurate and vivid colors.
Confirms unit's support for 3D video signals via HDMI.
Links unit's power standby to TV power off.
Switches audio output between TV and AV amplifier.
Adjusts unit's volume via TV volume control.
Lists supported audio file formats and their specifications.
Lists supported audio file formats and their specifications.
Lists supported Internet Radio formats and their specifications.
Sends contents from iTunes or Apple devices to compatible devices.
Apple's lossless audio compression codec for playback on iTunes, iPod, iPhone.
Apple's site for selling application software for iPhone/iPod Touch.
Details specifications for the power amplifier and audio output connectors.
To Next Page
