Denon AVR-X1000

133
Appendix
TipsPlaybackConnections
Contents
Front panel Display Rear panel IndexRemote
Settings
2 HDMI
Set this to change the HDMI input connectors assigned to the input
sources.
1 / 2 / 3 / 4 / 5 / Front : Assign an HDMI input connector to the selected
input source.
– : Do not assign an HDMI input connector to the selected input source.
%
•When “HDMI Control” (vpage129) is set to “On”, HDMI input connector
cannot be assigned to “TV AUDIO”.
2 DIGITAL
Set this to change the digital audio input connectors assigned to the
input sources.
Coax (Coaxial) / Opt (Optical) :
Assign a digital input connector to the selected input source.
– : Do not assign a digital input connector to the selected input source.
2 ANALOG
Set this to change the analog audio input connectors assigned to the
input sources.
1 / 2 : Assign a analog input connector to the selected input source.
– : Do not assign a analog input connector to the selected input source.
2 VIDEO
Set this to change the composite video input connectors assigned to
the input sources.
1 / 2 : Assign the video input connector to the selected input source.
– : Do not assign a video input connector to the selected input source.
2 Set Defaults
The “Input Assign” settings are returned to the default settings.