Denon AVR-X1000 User Manual

129
Appendix
TipsPlaybackConnections
Contents
Front panel Display Rear panel IndexRemote
Settings
Video
Make video-related settings.
HDMI Setup
Make settings for HDMI video/audio output.
NOTE
•When “HDMI Pass Through” and “HDMI Control” is set to “On”, it consumes
more standby power. If you are not using this unit for an extended period, it is
recommended that you unplug the power cord from the power outlet.
2 Auto Lip Sync
Make automatic compensation for timing shift in audio and video
output.
On (Default) : Compensated.
O : Not compensated.
2 HDMI Audio Out
Select HDMI audio output device.
AVR (Default) : Play back through speakers connected to the unit.
TV : Play back through TV connected to the unit.
%
•When the HDMI control function is activated, priority is given to the TV audio
setting (vpage104 “HDMI control function”).
•When the power of this unit is on and “HDMI Audio Out” is set to “TV”,
audio is output as 2-channel from the HDMI OUT connector.
2 HDMI Pass Through
Selects how the AV receiver will pass HDMI signals to the HDMI
output in standby power mode.
On (Default) : Passes the selected HDMI input through the AV
receiver’s HDMI output when the AV receiver is in
standby power mode.
O : No HDMI signals are passed through the AV receiver’s HDMI
output in standby power mode.
2 HDMI Control
You can link operations with devices connected to HDMI and
compatible with HDMI Control.
On : Use HDMI control function.
O (Default) : Do not use HDMI control function.
%
•Please consult the operating instructions for each connected device to check
the settings.
•Refer to “HDMI control function” (vpage104) for more information about
the HDMI control function.
NOTE
•If the “HDMI Control” settings have been changed, always reset the power
to connected devices after the change.

Denon AVR-X1000 Specifications

General

Receiver type	-
Frequency range	10 - 100000 Hz
Pre-out channels	1 SW
Input sensitivity	200 mV
Pre-out connectivity	Yes
Audio output channels	5.1 channels
Signal-to-Noise Ratio (SNR)	98 dB
Total Harmonic Distortion (THD)	0.08 %
Power output per channel (1KHz@6 Ohm)	145 W
Power output per channel (20-20KHz@8 Ohm)	80 W
HDMI in	5
Composite video in	2
Ethernet LAN (RJ-45) ports	1
Multichannel audio output type	RCA
Connectivity technology	Wired
AM antenna ports quantity	0
Speakers connectivity type	Binding post
Audio formats supported	AAC, FLAC, MP3, WAV, WMA
Image formats supported	JPS
Wi-Fi	No
Supported radio bands	FM
Internet radio services supported	vTuner
Product color	Black
Audio decoders	Dolby Digital EX, Dolby Pro Logic IIx, Dolby TrueHD, DTS 96/24, DTS-ES, DTS-HD Master Audio
Volume control	Rotary
Apple docking compatibility	iPhone
Number of products included	1 pc(s)
AC input voltage	230 V
AC input frequency	50 Hz
Power consumption (standby)	0.1 W
Power consumption (typical)	390 W
Cables included	AC

Weight and Dimensions

Depth	330 mm
Width	434 mm
Height	151 mm
Weight	8200 g