Name: Denon AVR-X1000
Brand: Denon
Rating: 4 (1 reviews)

To Next Page

To Previous Page

104

Appendix

TipsSettingsConnections

Contents

Front panel Display Rear panel IndexRemote

Playback

HDMI control function

A recent addition to the HDMI standard is CEC (Consumer Electronics Control), which allows control signals from one device to communicate with

another device via the HDMI cable connection. Not all HDMI-equipped devices have this capability.

Setting procedure

Set the HDMI output connector corresponding with the

HDMI control function.

Set “HDMI Control” (vpage129) to “On”.

Turn the power on for all the devices connected by

HDMI cable.

Set the HDMI control function for all devices connected

by HDMI cable.

•Please consult the operating instructions for the connected

devices to check the settings.

•Carry out steps 2 and 3 should any of the devices be unplugged.

Switch the television input to the HDMI input connected

to this unit.

Switch this unit input to the HDMI input source and

check if the picture from the player is ok.

When you turn the TV’s power to standby, check that

the power of this unit also goes to standby.

NOTE

•Some functions may not operate depending on the connected TV or player. Check

the owner’s manual of each device for details beforehand.

Other manuals for Denon AVR-X1000

Questions and Answers:

Need help?

Do you have a question about the Denon AVR-X1000 and is the answer not in the manual?

General

Receiver type	-
Frequency range	10 - 100000 Hz
Pre-out channels	1 SW
Input sensitivity	200 mV
Pre-out connectivity	Yes
Audio output channels	5.1 channels
Signal-to-Noise Ratio (SNR)	98 dB
Total Harmonic Distortion (THD)	0.08 %
Power output per channel (1KHz@6 Ohm)	145 W
Power output per channel (20-20KHz@8 Ohm)	80 W
HDMI in	5
Composite video in	2
Ethernet LAN (RJ-45) ports	1
Multichannel audio output type	RCA
Connectivity technology	Wired
AM antenna ports quantity	0
Speakers connectivity type	Binding post
Audio formats supported	AAC, FLAC, MP3, WAV, WMA
Image formats supported	JPS
Wi-Fi	No
Supported radio bands	FM
Internet radio services supported	vTuner
Product color	Black
Audio decoders	Dolby Digital EX, Dolby Pro Logic IIx, Dolby TrueHD, DTS 96/24, DTS-ES, DTS-HD Master Audio
Volume control	Rotary
Apple docking compatibility	iPhone
Number of products included	1 pc(s)
AC input voltage	230 V
AC input frequency	50 Hz
Power consumption (standby)	0.1 W
Power consumption (typical)	390 W
Cables included	AC