Need help?Do you have a question about the Denon AVR-X1200W and is the answer not in the manual?
General| HDMI in | 6 |
|---|---|
| AC (power) in | Yes |
| Composite video in | 2 |
| USB ports quantity | 1 |
| Digital audio coaxial in | 0 |
| Receiver type | - |
| Audio output channels | 7.2 channels |
| Total Harmonic Distortion (THD) | 1 % |
| Power output per channel (20-20KHz@8 Ohm) | 145 W |
| FM band range | 87.5 - 108 MHz |
| Supported radio bands | AM, FM |
| Internet radio services supported | Spotify |
| Product color | Black |
| Audio decoders | DTS-HD Master Audio |
| Apple docking compatibility | iPhone, iPod |
| AC input voltage | 230 V |
| AC input frequency | 50 Hz |
| Power consumption (standby) | 0.5 W |
| Power consumption (typical) | 430 W |
| Connectivity technology | Wired |
| Optical drive included | No |
| Audio formats supported | AIFF, ALAC, FLAC |
Weight and Dimensions| Depth | 339 mm |
|---|---|
| Width | 434 mm |
| Height | 151 mm |
| Weight | 8500 g |
Details on the optimal distance and angle for remote control operation.
Describes the discrete circuit technology and power amplifier capabilities.
Highlights 4K 60Hz input/output support and HDCP 2.2 compatibility.
Provides easy-to-follow setup guidance via TV screen.
Highlights the unit's GUI for improved operability.
Identifies and describes components on the front panel of the unit.
Lights indicating audio input mode settings for each input source.
Lights for Dolby or DTS signals input or decoding.
Controls the power for ZONE2 (separate room).
Buttons used to select the desired input source.
Guidance on determining speaker system and installing speakers in a room.
Instructions for connecting to a network using a LAN cable.
Details on connecting external remote control receiver units.
Procedure for turning the unit's power on and off.
How to select the desired input source for playback.
Instructions on how to mute the audio output.
Lists operations available via the option menu when in 'From iPod' mode.
Procedure for directly entering radio frequencies to tune in.
Details on Dolby sound modes like Surround, Digital, TrueHD, Atmos.
Describes the Multi Ch In sound mode for PCM sources.
Steps to enable and configure HDMI control functions.
Details on enabling and using the ARC function for TV audio.
Enjoy content from the currently selected input source.
Switch the input of the unit.
Change the sound mode of this unit from selected options.
How to check the remaining time of the sleep timer.
Instructions on how to cancel the active sleep timer.
Procedure to change the displayed name for Quick Select items.
Describes two methods for playing back audio in ZONE2.
Details on connecting ZONE2 via speaker output terminals.
Lists audio-related settings and their corresponding page numbers.
Lists video-related settings and their corresponding page numbers.
Configure assignments for HDMI, Digital, Analog, and Video input connectors.
Settings for speaker presence, size, and bass capacity.
Manually set speakers or change Audyssey Setup settings.
Settings for network connection and configuration.
Change the display language for the menu on the TV screen.
Configure ECO Mode and auto standby settings for energy saving.
Makes settings for audio playback with ZONE2.
Change the display title of each zone to one you prefer.
Change the quick select name that appears on the TV screen.
Makes settings related to the display on this unit.
Check for firmware updates and set notification display.
Shows information about unit settings and input signals.
Select whether to send anonymous usage data to Denon.
Protects settings from inadvertent changes.
Performs basic installation and settings via TV guidance.
Adjusts the output level to clarify dialogue from the center channel.
Adjusts the volume level for the subwoofer.
Softens treble in movie soundtracks to reduce harshness.
Sets whether to output with or without dynamic range compression.
Adjusts dialogue volume for movies and music.
Adjusts the low frequency effects level (LFE).
Optimizes compressed audio sources with specific settings for highs/bass.
Sets how the volume level is displayed.
Makes a setting for the maximum volume.
Defines the volume setting active when power is turned on.
Settings for using the graphic equalizer for headphones.
Set whether to use the graphic equalizer for headphones or not.
Make settings for HDMI video/audio output.
Automatic compensation for timing shift in audio and video output.
Select the HDMI audio output device.
Sets where to display the volume level on screen.
Displays status of operation when sound mode or input source changes.
Sets display time for playback information.
Assigns HDMI, Digital, Analog, and Video input connectors to sources.
Notes for digital audio output from TV/satellite boxes.
Changes digital audio input connectors assigned to input sources.
Changes analog audio input connectors assigned to input sources.
Changes composite video input connectors assigned to input sources.
Resets Input Assign settings to default values.
Sets audio input modes for different input sources.
Sets the audio decode mode for input source.
Measures acoustic characteristics for automatic speaker setup.
Settings for subwoofer direct mode.
Settings for subwoofer without direct mode.
Selects power amplifier usage method to match speaker system.
Selects how to use the power amp for different speaker configurations.
Sets the front speaker size (Large/Small).
Sets the unit of distance measurement (Feet or Meters).
Sets the minimum variable width for distance measurement.
Specifies the range for setting speaker distances.
Outputs a test tone from selected speaker for volume adjustment.
Returns the 'Levels' settings to the default values.
Selects how to set the crossover frequency for speakers.
Sets the crossover frequency based on speaker capabilities.
Selects low range signals to be reproduced by the subwoofer.
Sets the LFE signal playback range for the subwoofer.
Displays network information like SSID and IP Address.
Choose between wireless LAN or wired LAN connection.
Stops or enables the Wi-Fi function when using wired LAN.
Use a LAN cable to connect to a network.
Use the wireless LAN (Wi-Fi) function to connect to a network.
Connect to a wireless LAN router using scan or iOS device methods.
Selects how to connect to the network (automatic or manual).
Sets the IP address within the allowed ranges.
Input the subnet mask for network connection.
Selects a friendly name for the unit from a list or custom input.
Restores the Friendly Name to its default setting.
Checks the physical LAN port connection status.
Checks the connection from the unit to the router.
Checks if the unit has access to the Internet (WAN).
Sets the display language for the menu on the TV screen.
Configures ECO Mode and auto standby for energy saving.
Reduces power consumption when the unit is on.
Always displays the power consumption meter on the TV screen.
Displays meter when changing mode or volume.
Does not display the meter.
Sets auto standby time for MAIN ZONE when no signals are input.
Automatically shuts off power in ZONE2 after a set period.
Sets the output volume level for ZONE2.
Makes a setting for the maximum volume in ZONE2.
Defines the volume setting active when power is turned on for ZONE2.
Adjusts the display brightness of the unit.
Executes the firmware update process.
Sets display of notification messages for firmware updates.
Shows audio information for MAIN ZONE.
Shows HDMI signal information for MAIN ZONE.
Shows information about current settings for MAIN ZONE and ZONE2.
Displays information for the current firmware and DTS version.
Sets whether notification messages are displayed.
Lists common problems and their solutions.
Lists WMA, MP3, WAV, FLAC, ALAC, DSD, AIFF compatible formats.
Lists WMA, MP3, WAV, MPEG-4 AAC, FLAC, ALAC, DSD, AIFF specs.
Explains Audyssey Dynamic EQ, Dynamic Volume, and MultEQ XT.
Explains Dolby Atmos, detailing its dimension and immersion.
Controls listening experience by lifting dialogue from background sounds.
Explains DTS abbreviation and its surround sound experience.
Describes the DTS 96/24 digital audio format.
Explains the standard DTS digital surround format.
Explains ALAC codec for lossless audio compression.
Explains FLAC, a lossless free audio file format.
Abbreviation for Low Frequency Effect channel.
Describes the standardized MP3 audio data compression scheme.
Describes WMA audio compression technology by Microsoft.
Explains sampling frequency and its effect on sound reproduction.
Definition of AC resistance value for speakers.
Corrects signal level automatically for individual program sources.
Difference between max undistorted sound level and min discernible level.
Converts surround audio channels to a lower number for playback.
Describes video signal scanning system for smoother images.
Sends contents from iTunes/iPhone/iPod touch/iPad via network.
Trademarks for Digital Living Network Alliance.
Free online content server for Internet Radio.
Copyright protection technology for digital signals.
Defines the room where the unit is placed.
Operation required to connect a Bluetooth device.
Prevents damage to devices within the power supply.
Details power amplifier rated output and analog input specifications.
Specifies rated output power for different channels.
Lists output connector impedance requirements.
Specifies analog input sensitivity and impedance.
To Next Page
