Denon AVR-X1000 User Manual

52
Appendix
TipsSettingsConnections
Contents
Front panel Display Rear panel IndexRemote
Playback
2 Adding to the FAVORITE STATION button
(vpage83)
2 Operations available through the OPTION
button
•Tuning in by entering the radio frequency (Direct Tune) (vpage52)
•Presetting the current broadcast station (Preset Memory)
(vpage54)
•Changing the tuning mode (Tune Mode) (vpage53)
•Tuning in to radio stations and presetting them automatically (Auto
Preset) (vpage55)
•Specify a name for the preset broadcast station (Preset Name)
(vpage55)
•Skipping preset broadcast stations (Preset Skip) (vpage56)
Tuning in by entering the radio
frequency (Direct Tune)
You can enter the receiving frequency directly to tune in.
1
Press OPTION.
The option menu screen is displayed.
2
Use ui to select “Direct Tune”, then press ENTER.
The direct tuner screen is displayed.
3
Use ui to select a number and press p.
The screen that lets you enter the frequency is displayed.
•If o is pressed, the immediately preceding input is cancelled.
4
Repeat step 3 and enter the frequency of the radio
station you want to hear.
5
When setting is completed, press ENTER.
The preset frequency is tuned in.

Denon AVR-X1000 Specifications

General

Receiver type	-
Frequency range	10 - 100000 Hz
Pre-out channels	1 SW
Input sensitivity	200 mV
Pre-out connectivity	Yes
Audio output channels	5.1 channels
Signal-to-Noise Ratio (SNR)	98 dB
Total Harmonic Distortion (THD)	0.08 %
Power output per channel (1KHz@6 Ohm)	145 W
Power output per channel (20-20KHz@8 Ohm)	80 W
HDMI in	5
Composite video in	2
Ethernet LAN (RJ-45) ports	1
Multichannel audio output type	RCA
Connectivity technology	Wired
AM antenna ports quantity	0
Speakers connectivity type	Binding post
Audio formats supported	AAC, FLAC, MP3, WAV, WMA
Image formats supported	JPS
Wi-Fi	No
Supported radio bands	FM
Internet radio services supported	vTuner
Product color	Black
Audio decoders	Dolby Digital EX, Dolby Pro Logic IIx, Dolby TrueHD, DTS 96/24, DTS-ES, DTS-HD Master Audio
Volume control	Rotary
Apple docking compatibility	iPhone
Number of products included	1 pc(s)
AC input voltage	230 V
AC input frequency	50 Hz
Power consumption (standby)	0.1 W
Power consumption (typical)	390 W
Cables included	AC

Weight and Dimensions

Depth	330 mm
Width	434 mm
Height	151 mm
Weight	8200 g