Denon AVR-X1000 User Manual

112
Appendix
TipsPlaybackConnections
Contents
Front panel Display Rear panel IndexRemote
Settings
Settings
Menu map
For menu operation, connect a TV to this unit and display the menu on the TV screen. For menu operations, see the following page.
By default, this unit has recommended settings defined. You can customize this unit based on your existing system and your preferences.
2 Audio
Setting items Description Page
Dialog Level Sets the output level to clarify the dialogue output from the center channel.
120
Subwoofer Level This setting adjusts the volume level for the subwoofer.
120
Subwoofer Turn subwoofer output on and o.
120
Subwoofer Level This setting adjusts the volume level for the subwoofer.
120
Surr.Parameter Adjusts surround sound parameters.
121
Cinema EQ Gently softens the upper treble range of movie soundtracks to reduce possible harshness and improve clarity.
121
Loudness Mngmt This sets whether to output as specified in “Dynamic Comp.” or output directly without compressing the
dynamic range of audio recorded in the disc.
121
Dynamic Comp. Compress dynamic range (dierence between loud and soft sounds).
121
Low Frequency Adjust the low frequency eects level (LFE).
122
Center Image Distributes the dialogue output from the center channel to the front left and right channels and widens the sound
image in the front.
122
Panorama Assign front L/R signals to also go to the surround channels for wider sound.
122
Dimension Shift sound image center to front or rear to adjust playback balance.
122
Center Width Distributes the dialogue output from the center channel to left and right channels and widens the sound image
in the front.
123
Delay Time Adjust the audio delay time against video to extend the sound field image.
123
Eect Level Adjust the sound eect level of the current sound mode.
123
Room Size Determine size of acoustic environment.
123

Denon AVR-X1000 Specifications

General

Receiver type	-
Frequency range	10 - 100000 Hz
Pre-out channels	1 SW
Input sensitivity	200 mV
Pre-out connectivity	Yes
Audio output channels	5.1 channels
Signal-to-Noise Ratio (SNR)	98 dB
Total Harmonic Distortion (THD)	0.08 %
Power output per channel (1KHz@6 Ohm)	145 W
Power output per channel (20-20KHz@8 Ohm)	80 W
HDMI in	5
Composite video in	2
Ethernet LAN (RJ-45) ports	1
Multichannel audio output type	RCA
Connectivity technology	Wired
AM antenna ports quantity	0
Speakers connectivity type	Binding post
Audio formats supported	AAC, FLAC, MP3, WAV, WMA
Image formats supported	JPS
Wi-Fi	No
Supported radio bands	FM
Internet radio services supported	vTuner
Product color	Black
Audio decoders	Dolby Digital EX, Dolby Pro Logic IIx, Dolby TrueHD, DTS 96/24, DTS-ES, DTS-HD Master Audio
Volume control	Rotary
Apple docking compatibility	iPhone
Number of products included	1 pc(s)
AC input voltage	230 V
AC input frequency	50 Hz
Power consumption (standby)	0.1 W
Power consumption (typical)	390 W
Cables included	AC

Weight and Dimensions

Depth	330 mm
Width	434 mm
Height	151 mm
Weight	8200 g